Many students would like to know how to draw a three-dimensional effect on a white sheet of paper? I have compiled relevant information to teach you how to draw 3D paintings simply, come take a look!
Simple method of drawing in three dimensions
1. First prepare two pieces of straw paper, one larger and one smaller. (The small paper should not be too small, just tear the A4 size in half. The large paper should not be smaller than A4 size.)
2. Some preparation is required: first mark the larger paper horizontally and vertically with a pencil. the grid is used as coordinates, which is very useful for the following composition. Then lay the larger paper flat and place it in a more distant location (about 2-3 m), then place the smaller paper vertically in front of you like a flat surface in front of you.
3. Draw the big wordpaper yew on the small paper. Remember that proportions and placement should be as accurate as possible. It involves projecting the physical object you see in front of you onto a flat surface and placing it on a small piece of paper, as if you were taking a photo.
Project the large paper onto the small paper. Here is the image on the small paper:
4. Draw the outline and main lines of what you want to draw on the small paper. (Defined by the outline of the large paper, covering horizontal and vertical grids). For example, for a chair, enlarge the small paper:
5. Remember the outline of the chair on the small paper and the relative positions of the main lines on the grid. You can find some key points and. do it on the big paper. Click on the brand.
Just like the six red dots in the image below, find the corresponding positions on the large paper.
6. De the same way, add some main lines. Then, based on your own sense of image and proportion, you complete the details of the chair. At this point, you will find that the chair in the big picture is elongated, the legs are small, and the head is large. large paper to the original flat position. position, you will find that this chair is three-dimensional.
The 3D three-dimensional drawing method is as follows:
1 First prepare a piece of white paper and some -uns. colored pencils and white correction fluid.
2. First use colored pencils to write the words you want to achieve a three-dimensional effect. As shown in the image below, they are drawn with light blue colored pens.
3. Find a suitable position and draw the projection in that position based on the direction from which you want to see these wordss appear in three dimensions.
4. Paint the hollow projections in these directions with a solid color, such as a darker blue.
5. Write these words in three dimensions under the projection to make them more realistic.
6. If you look at these words in a specific direction, you can immediately see an obvious 3D meaning.
A 3D stereogram uses the difference in vision between people's eyes and the principle of optical refraction to allow people to directly see a three-dimensional image in a plane. Image elements may either protrude from the image or be visible. be deep.
Using special optical materials (commonly known as grating materials) to display a realistic three-dimensional world on a flat surface, it is difficult to confidently achieve 3D effects. It breaks the stereotype of traditional graphic images and brings people a new unforgettable visual experience. Mayns are flat, the eyes appear three-dimensional, the foreground is prominent, the back is deep, and the landscape is realistic. Various images can produce stereoscopic effects.