Commercial land.
According to the “Classification and Planning Standards of Urban and Construction Land”, industrial land includes production, warehousing and research and development land, and its purpose is primarily to provide supporting facilities and sites. for industrial production. As an industrial energy facility, the building land for thermal power plants is mainly industrial land. Thermal power plants use large areas of land to accommodate power generation equipment, fuel storage areas, cooling facilities, etc. Waste gases and wastewater will be produced during the operation of thermal power plants. Environmental impact factors must be planned and managed appropriately.
Can we build photovoltaic power plants on industrial landriels and mining?
Large-scale thermal power plants must meet the following main conditions:
1. Water - -- approval from the Department of Water Conservation is required
2. Land---Approval from the Department of Lands and Resources is required
3. Environmental Assessment---State Approval. Environmental Protection Administration is required
4. Grid Access Application -- Must be approved by local grid office and power grid company
5. Feasibility study ---to be reviewed by. China Consulting Company or Electric Power Planning Institute type unit
6. Investment --- None What's the matter with the basic fund As long as the subsequent funds are approved by the National Development and Reform Commission, banks can apply? for loans
7 Approval by the National Development and Reform Commission --- theyamen most importantly, it is the same as other things that have not been adopted.
p>< p>Photovoltaic power plants can be built on industrial and mining lands.
The process of building a photovoltaic power plant is as follows:
1. Project Feasibility Study: Conduct project feasibility study, including site selection, power plant scale, environmental impact assessment, technical aspects. feasibility analysis, assessment of economic benefits, etc. ;
2. Planning and design: Based on the results of the project feasibility study, formulate project planning and design plans, including project layout, land layout, equipment selection, plans of construction. , etc. ;
3. Approval and financing: carry out an environmental impact assessment, land use application,approval of construction projects and other approval procedures, and also carry out financing and investment plans;
4. Equipment procurement and construction: Determine equipment suppliers and construction units carry out equipment procurement and construction, including civil engineering, electrical engineering, photovoltaic module installation, etc. ;
5. Operation and maintenance: After installation. construction is completed, operating and debugging tests will be carried out, and it will be officially put into operation. At the same time, daily maintenance and management are carried out to ensure the stable operation of the power plant and the efficiency of power generation.
Conditions to be met to build a photovoltaic power plant:
1. Land conditions: a certain amount of land, good lighting conditions, no obstruction bytall buildings, trees, etc. ., and stable geological conditions;
2. Financing conditions: The construction of photovoltaic power plants requires significant capital investment, including funds for the purchase of equipment, installation and commissioning, operation and maintenance, etc. ;
3. Local political support: conducive to political support for the construction of PV power plants, such as tax incentives, subsidy policies, etc. ;
4. Network access conditions: Good network access. the conditions are required, the network capacity is sufficient, and the network operates stably.
5. Location Environmental Impact Assessment: Environmental impact assessment shall be carried out and approved by the relevant departments;
6. Relevant technical conditions: It requires a certain technical strength and mastery. knowledge ofPhotovoltaic power plants, capable of carrying out the installation, operation and maintenance of equipment, etc.
In summary, the construction of photovoltaic power plants needs to consider many factors, including technology, environmental protection, policies, etc. At the same time, communication and consultation with relevant departments are necessary during the construction process to ensure the smooth running of the project.
Legal basis:
Article 1 of the "Interim Measures for the Management of Photovoltaic Power Plant Projects of the People's Republic of China"
In order to standardize the management photovoltaic power plant projects and ensure the safety of photovoltaic power plants and electrical energy. The system operates safely and reliably to promote the sustainable and healthy development of the photovoltaic power generation industry in accordance with the “Energy LawRenewable Resources of the People's Republic of. China", the "Electricity Law of the People's Republic of China", the "Administrative Licensing Law of the People's Republic of China", the "Electricity Supervision Regulations" and the "Regulations of the Council State opinions on these measures are formulated in accordance with "Several Opinions on Promoting the Healthy Development of the Photovoltaic Industry".