If the hand pull plate of the gasoline generator is broken, it is generally recommended to replace it.
Specific solutions are as follows:
1. The hand rope is broken.
Answer: If the hand rope is broken, you can directly replace the hand rope, which generally costs one or two yuan each. There is no need to disassemble the internal structure of the traction plate, just roll it up directly. You can also take it directly to a store that sells generator parts and ask a technician to help you repair it.
2. The generator hand-operated plate buckle is broken
Answer: If this is the problem, you can directly replace the hand-operated plate. Generally, hand-made dishes are not very expensive, costing tens of yuan. It can be sold in physical stores or online. The installation is tvery simple. Simply align the screw holes and install directly. The direction of the manual handle is backwards (it is convenient to pull it with the right hand.)
3. The hand-operated plate is inelastic
Answer: If the hand-operated plate is inelastic, it is also recommended to replace it directly if it falls, the spring inside is broken. This is generally replaced without accessories.
Precautions for use: When using the manual traction plate, be sure to pull and release it gently. Pull lightly on the pull plate to lock the motor before starting the unit. Do not pull forcefully on the traction plate. start, as this will easily damage the card buckle. It is also not allowed to release the handle directly after starting, as the rebound could easily damage the housing and handle. Cautious use peut prolong life.
Simply remove the traction plate and spin the steering wheel to check if there is a problem. Generally, such problems rarely occur. The engine may be low on oil when you are using it, causing the shaft. to grip, that is, the connecting rod and crankshaft bite. If you die, it will be more troublesome.
If it is a generator, you can check for foreign objects or damage between the stator and rotor of the generator. For example, the rotor wire is thrown, causing it to come out. stuck. For a water pump, check for foreign objects sucked into the pump body.
Another option is to disassemble the spark plug and check if oil has entered the combustion chamber. However, this situation only makes pulling more laborious, and there will be no feeling of jamming or better collision. .
The es motorsence is an engine that uses gasoline as fuel to convert internal energy into kinetic energy. Since gasoline has low viscosity and evaporates quickly, the gasoline injection system can be used to inject gasoline into the cylinder. After being compressed to a certain temperature and pressure, it is ignited with a spark plug to expand the gas and do the work. The characteristics of gasoline engines are high speed, simple structure, light weight, low cost, smooth operation, and easy operation and maintenance. Gasoline engines are widely used in cars, especially small cars.
The bodywork
is the basis for assembling all the engine parts. It includes the cylinder head, cylinder block and lower crankcase (oil pan). The cylinder head and the inner wall of the cylinder block together form part of the combustion chamber.we. Many parts of the body are components of other systems.
The crank connecting rod mechanism
is the motor by which the engine generates and transmits. It is a mechanism that converts the linear reciprocating motion of the piston into the rotational motion of the crankshaft to produce power. It includes piston, piston pin, connecting rod, crankshaft with flywheel and cylinder block, etc.
The valve system
includes the intake valve, exhaust valve, valve lifter, camshaft and camshaft timing gear. cams (driven by the crankshaft timing gear), etc. Its function is to charge the combustible mixture into the cylinder in time and discharge the exhaust gas from the cylinder in time.
Fuel supply system
The fuel supply system of the gasoline engine includes a gasoline tank, a fuel pump, a fuel filter, a fiair filter, carburetor, intake pipe, exhaust pipe, and exhaust pipe, etc. Its function is to mix gasoline and air into a suitable combustible mixture, supply it to the cylinder for combustion, and vent the exhaust gases generated by combustion out of the engine.
The cooling system
mainly includes water pump, radiator, fan, water distribution pipe, cylinder block and water jacket in the cylinder head. Its function is to dissipate heat from high temperature parts into the atmosphere to ensure normal engine operation.
Lubrication system
Including oil pump, pressure relief valve, lubricating oil passage, filter manifold, oil filter and radiator 'oil. Its function is to supply lubricating oil to the friction parts to reduce the friction resistance between them, reduce wearparts of the machine, partially cool the friction parts and clean the friction surfaces.
The starting system
includes the engine starting mechanism and its auxiliary devices.