Troubleshooting: According to common practice, it is generally considered to be caused by air, blockage or loose seal in the diesel generator oil system. However, specifically for this diesel generator, the maintenance personnel first checked the oil system. , filter element and in other related components, no leaks or motor blocking defects were found; fuel pump, fuel injector, etc. were checked and no problems were found in addition, valve clearance, injection advance angle, etc. ; The diesel generator was also checked and adjusted, and the problem was detected. The phenomenon still exists. Finally, after careful observation and analysis by the staff, it was concluded that although the diesel generator stalled automatically, it was easy to start, and the noise and operation were basically normal. The root cause of this type of paIt always resides in the generator oil circuit system, which can be caused by insufficient fuel pre-pressure. Since there is no problem with the oil transfer pump, there is only one reason left for insufficient pre-pressure. -low pressure oil circuit pressure, which is the oil return element. There is a problem with the valve bolts. You can refer to troubleshooting daily engine failures
What is the reason why the generator stops automatically?
Introduction What is the reason for the generator to automatically turn off? Troubleshooting: Conventionally, this is generally considered to be due to air, blockage, or a loose seal in the diesel generator's oil circuit system.