1. The car's live wire is usually about 3 meters long. It should be noted that the live wire should not be too long, this will easily cause the resistance to increase and consume too much power.
2. When the car battery is exhausted, the car is difficult to start. Battery drain will also affect the car's entire power system. In this case, you can use the live wire connection method. to the car.
3. To connect the live wire, you need to use 16 square meters of copper wire to interconnect the battery electrodes of the two cars. Start the car with power and keep the engine idling. the battery is low, using this method the car can start immediately. After starting, the car should remain idling. After 15 to 20 minutes of idling, the generator will charge the battery.
4.In order to avoid significant energy consumption in the car battery, you should develop good driving habits when using the car. Before turning off the car, you must turn off the car's electrical equipment. Car electrical equipment mainly includes car headlights, radios, driving recorders, etc. Some car owners easily forget to turn off the car headlights when driving the car at night, which will consume a lot of power in the car battery.
5. It is worth mentioning that the car battery is also affected by temperature. The lower the outside temperature, the lower the power stored in the car battery.
For more information about the requirements for connecting a car, please enter: https://m.abcgonglue.com/ask/5acb5d1616110042.html?zd to view plcontent us
Use a car to provide Will a car catching fire cause damage to the car circuit?
The wiring diagram is as follows :
The positive pole of the battery is connected to the thicker wire of the motor, and the negative pole is grounded to the motor. There are two terminals in total, one thick and one very small thick is connected to a main wire of the positive terminal of the battery, one is connected to the main wire. ignition switch, and the smaller one is connected to the start position of the ignition switch.
The ignition switch usually has two positions, one for turning on and one for starting. Three wires are enough, and one is the power wire, which is the main power wire of the. engine. The second is the power cord to the positive pole of the regulator and the third is the motor start wire. There are usually three wires on the regulator,which are the positive pole, the magnetic field and the negative pole. The positive pole is connected to the ignition switch, the negative pole can be directly connected to the iron, or connected to the negative pole of the generator, or connected to the negative pole of the battery. The magnetic field can be directly connected to the negative pole of the generator. magnetic field of the generator. The magnetic field is represented by F, and the generator can usually be connected to three wires.
Detailed Information
A generator refers to a mechanical device that converts other forms of energy into electrical energy. It consists of a water turbine, a steam turbine, a diesel engine or other electrical machine converts the energy generated by water flow, air flow, fuel combustion or fission nuclear energy into mechanical energy and transmits it to the generator, which is then converted into electrical energy.
Generatorsare widely used in industrial and agricultural production, national defense, science and technology and daily life.Wide range of uses. There are many forms of generators, but their operating principles are all based on the law of electromagnetic induction and the law of electromagnetic force. Therefore, the general principle of its construction is: using suitable magnetic and conductive materials to form magnetic circuits and circuits that conduct electromagnetic induction among themselves to generate electromagnetic energy and achieve the conversion goal of energy.
Reference:
Taking power from other cars can easily damage the car. The main reason is that the vehicle battery is already charged.If you need to power the seesures other people to start them.
You should know that the general starting current can reach up to 500-600A. Although it quickly drops to 100-200A later, the average is 100-300A, so it is very harmful to the battery. the power supply time is too long, it is easy to cause significant battery loss, and even your own vehicle cannot start.
You can't power other cars casually. First of all, you don't understand the problems of other cars. If other cars are caused by short circuits, if you power other cars, your car will also suffer. Issue. A short circuit will instantly produce sparks and explosion sounds. The scene is very frightening. A wrong operation can even cause the vehicle to catch fire.
Notes when connecting other cars:
① Before connecting the cable, be sure to turn off the engine
② Connect the cable in strict accordance with the above During the connection steps, there should be no contact between the two cars;
③ The order of removing the wires is exactly the reverse order of the order of connecting the wires: remove the ground, remove the negative pole. , remove the positive pole of the tram, and finally remove the positive pole of the non-tram.