There are many reasons why the generator cannot fire.
The main reasons why the generator does not fire are:
1. The mixing problem. After removing the spark plug, let the machine run more often. It is best to start it with electricity or by hand. Okay, pull it about 10 times. While pulling, place your finger on the spark plug to check for kickback. After pulling it a few times, feel the finger. blocked to see if there is a smell of gasoline. If you have any. If you check like this and there is a smell of gasoline on your finger, it will probably be able to start. assuming the spark plug is on, and you need to install the air damper after draining the engine.
2. The oil alarm isolator problem is nothing as long as the current can ignite. Your generator will not start if there is nooil or not enough oil. Check if there is enough oil. You said your generator hasn't been used in two years. It's possible that the engine oil protection device has failed because it hasn't been used for too long, but that doesn't matter. Check if the start failure is caused by the oil alarm. After making sure there is sufficient engine oil, try the starting method to see if the electrical ignition is turned on. If so, everything will be fine.
3. There is a problem with the oil circuit. Check the pressure ratio. It can also be caused by a lack of oil and an insufficient pressure ratio.
4. The problem of infrequent use is that the carburetor oil level drops, corrosion occurs inside, and the oil hole becomes blocked. Engine oil flowed back into the oil pan after it was not. started for a long timeperiod. When it is started for the first time, when there is no engine oil lubrication, the cylinder pressure cannot be achieved at that time, too much gasoline (cold oil) n is not burned and the spark plug is snuffed out. the candle is wet).