Check if engine oil and gasoline have been added recently.
While it is not new, it has been added for over three months. You must drain the oil and gasoline and replace them. Engine oil and gasoline are only valid for three months. Engine oil and gasoline older than three months will lose viscosity and have no effect. Check if the generator oil and gasoline are full. The generator will not catch fire if it is not full.
The following checks should be carried out before each use of a gasoline generator
1 If the generator is not used for a long time (more than a month), the starter battery will shut down. lose power due to self-discharge. Please use an external charger to charge the battery.
2. Check if there is enough gasoline in the fuel tank.
3. Check the oil circuit switch and oil circuitoil to detect any oil leaks.
4. Check whether the battery starting voltage is higher than 12V and observe whether the battery appearance is damaged or leaking.
5. Observe the quality of the engine oil to determine if it needs to be replaced.
Hello, there are several reasons why it is impossible to start a fire, and it has nothing to do with too much engine oil. Firstly, the instrument light does not come on when the key is turned, the starter makes no noise and there is no sign of the car starting! At this point you need to determine if the battery is running out of power. Usually the battery can only be used for two to three years! This situation can be resolved by replacing the battery or having someone supply electricity. Second, the starter makes a noise and the sound is low. The battery may be running out of power or may be startingur is damaged! At this time, turn on the headlights if the brightness is sufficient and the horn sounds, it is generally a problem coming from the starter! You can try hitting the starter with a stick, maybe it will start.
Third, the starter is noisy. But I just can't get in the car! There are many reasons, including oil pump damage, no fuel injection, ignition system failure, improper timing, crankshaft position sensor failure, engine position sensor failure, water temperature, camshaft position sensor failure, anti-theft work, insufficient cylinder pressure. Troubleshooting in Steps