If the hand pull plate of the gasoline generator is broken, it is generally recommended to replace it.
Specific solutions are as follows:
1. The hand rope is broken.
Answer: If the hand rope is broken, you can directly replace it, which usually costs one or two yuan each. There is no need to disassemble the internal structure of the traction plate, just roll it up directly. You can also take it directly to a store that sells generator parts and ask a technician to help you repair it.
2. The generator hand-operated plate buckle is broken.
Answer: If this is the problem, you can directly replace the hand-operated plate. Generally, hand-made dishes are not very expensive, costing tens of yuan. You can buy it in a physical store or online. Installation is very simple.Just align the screw holes and install directly. The direction of the manual handle is backward (it is convenient to pull it with the right hand.)
3. The hand-operated plate is inelastic
Answer: If the hand-operated plate is inelastic, it is also recommended to replace it directly if it falls, the spring inside is broken. This is generally replaced without accessories.
Precautions for use: When using the manual traction plate, be sure to pull and release it gently. Pull lightly on the pull plate to lock the motor before starting the unit. Do not pull forcefully on the traction plate. start, as this will easily damage the card buckle. Do not release the handle directly after starting, otherwise the rebound may damage the housing and handle. Careful use can prolong life.
What should IWhat to do if the cord of the corded generator cannot go back after being removed?
The practice in the generator industry will come to answer:
p>
What to do if the hand pull plate is broken, it is generally recommended to replace it. Specific solutions are as follows:
1. The hand rope is broken. Answer: If the hand rope is broken, you can directly replace the hand rope, which generally costs one or two yuan each. There is no need to disassemble the internal structure of the traction plate, just roll it up directly. You can also take it directly to a store that sells generator parts and ask a technician to help you repair it.
2. The generator hand-operated plate buckle is broken. Answer: If this is the problem, you can directly replace the hand-operated plate. In general, dishes prepared by handare not very expensive and cost tens of yuan. You can buy it in a physical store or online. Installation is very simple. Just align the screw holes and install directly. The direction of the manual handle is backward (it is convenient to pull it with the right hand.)
3. The manual plate is inelastic. Answer: If the hand plate is inelastic. , it is also recommended to replace it directly. The spring inside is broken, if it falls off, it is usually replaced without accessories.
Precautions for use: When using the manual traction plate, be sure to pull and release it gently. Pull lightly on the pull plate to lock the motor before starting the unit. Do not pull forcefully on the traction plate. start, as this will easily damage the card buckle. Do not release the handle directly after starting, otherwise the rebound pcould damage the housing and handle. Careful use can prolong life.
I can't do anything other than remove the pulley, rewind the wire and add oil to the middle. Just replace it with a pull plate.
Your problem should be that the scroll spring inside is being stretched and cannot bounce back
So it is recommended to replace it directly
Boxin accessories are specially provided for reference
168 series gasoline engine 188 series Diesel engine 170 series 178 series 186 series.
< p>Reference materialsProfessional friends: https://www.1688.com/ask/873be914-929c-4d8a-94bf-cf7517f140fe.html < /p>< /p>