Tik Tok has recently become popular with its "sparkle" special effects videos, which have attracted the attention and interest of many users, hoping to increase their popularity by imitating effects videos popular specials. The editor below will tell you how to set up Douyin sparkle effects to help you play with the software.
Steps to set Spark special effects on Douyin:
1. After opening the homepage of “Douyin”, the first step is to select the “+” button at the bottom to enter. the shooting page for video recording, or directly import local video material to your phone.
2. After adding video material successfully, you will enter the video editing page. At this time, click the “Special Effects” button in the lower left corner to find the “Sparks” special effect.
3. The so-called spark effect is actually the effand “fireworks” in the “filter” special effects category. Just long press to add it to the screen. to try. !
If you want to add sparkle effects to Douyin videos, edit them according to the method above!
Tutorial video on how to use gas
A dead car battery will affect the use of the car's power distribution facilities and may also cause the car to stop. At this point, a battery charger can be used to charge the battery. If the car is driving outdoors and suddenly loses power and cannot drive, you can use the live wire connection method for emergency response.
Car wiring involves connecting the battery levels of two cars with a charging cable for charging. The actual wiring example tutorial is as follows:
1. The car must be connected. Obtainnose one. rescue trailer, assemble the fronts of the two vehicles and prepare two charging cables.
2. Open the engine hood and connect the positive and negative electrodes of the two vehicle batteries with the charging cables.
3. The engine of the emergency vehicle idles at high speed, and the electric vehicle operates exploratively. If the battery is discharged, the vehicle should start quickly, then the generator will charge the battery.
Video tutorial on how to connect a car to a hotline
How long does it take to stop the engine after the hotline is activated?
Under normal circumstances, after putting the car into operation, the engine should idle. It takes about thirty minutes to turn off the heating. At this time, the discharged battery can be charged independently using the car's generator. FaiPay attention to the condition of the battery in normal times. If the car is left unused for a long time, it is recommended to remove the negative stage of the battery to avoid power loss.
Millions of car purchase subsidies
The video tutorial on using a gas stove is as follows: Tutorial How to use gas
First adjust the valve body knob, turn the valve counterclockwise. Before use, smell if there is a pungent smell, listen to the sound of air leaking, then turn it on if it is normal. Press and hold the gas stove knob, then turn it to the left until it lights up with a “pop” sound. If there is no fire, turn the knob to its original position and repeat the above action.
If abnormal phenomena such as loss of flame, flashback and yellow flame are detected in the flamme, the damper must be adjusted to make the flame normal. When you turn off the heat, turn the valve clockwise until it stops. temperatureTips: After cooking each day, remember to form good habits. Return the main gas switch to its original position for safety reasons first and to prevent gas leaks second.
A gas stove is a stove that mainly supplies natural air to the space between the stove body and the upper cover to supplement the lack of air during combustion, thereby promoting combustion and reducing the generation of carbon monoxide and nitrogen oxides. . The air inlet methods of gas stoves are divided into upper air inlet, lower air inlet, full air inlet, etc., which can be divided into several categories according to different classification standards.
In terms of sourcee gas, gas stoves are mainly divided into liquefied gas stoves, gas stoves and natural gas stoves. According to the focus, it is divided into single focus, double focus and multiple focus.
Desktop stove: The desktop stove mainly consists of burner (burner head, inner and outer fire cover), valve body (including nozzle, plate shock absorber, the cone spring), a shell (can be a split shell——The rear panel and the left and right side panels are assembled, or it can be an integral stretched shell), a frame stove, a button, a liquid tray, an oven foot, an air inlet pipe and a pulse igniter (special for pulse-ignition stoves).