The reasons why the gasoline generator cannot ignite are: insufficient fuel for ignition; insufficient battery voltage or voltage too low to allow the starter motor to provide sufficient speed and torque to start the engine, including spark plug or ignition coil failure; , unable to allow the engine to fire normally. A gasoline generator is generally composed of a stator, rotor, end cover, bearing and other components. An engine is a machine that converts chemical energy into mechanical energy. The conversion process is actually a work cycle process of generating. kinetic energy by burning fuel in the cylinder to drive the engine. The reciprocating movement of the piston in the engine cylinder drives the connecting rod connected to the piston and the crank connected to the connecting rod to perform movementalternating circular around the center of the crankshaft. to produce power.
One million subsidies for car purchases
The gasoline generator cannot start, is it related to too much oil?
1. First check if oil and gasoline are available. newly added Yes, if it is not newly added and more than three months old, you need to change the engine oil and gasoline and replace them with new ones, because the engine oil and gasoline are not valid than three months, and the oil and gasoline used for more than three months has lost its viscosity, has no effect.
2. The old gasoline generator is having trouble turning on. We need to check the spark plug for carbon deposits. If so, it must be cleaned or replaced with a new one. Then check if the air filter is too dirty, causing a lack of air. If so, it also needs to be cleaned or replaced. We must also seecheck if the engine oil has melted, because if the machine is not used for a long time, the engine oil must be drained. Finally, we also need to check whether the gasoline is qualified and whether it has evaporated. , resulting in insufficient purity and difficulty in inflammation.
3. Check whether the starting method is correct, check whether the oil switch can be turned on, whether the air door is closed when the cold engine starts for the first time and whether the starting speed is reached, etc. First, turn on the crankcase oil drain switch, quickly fire the engine, and check the oil flow to determine the extent of the fault. If no oil comes out of the oil switch or little oil comes out, the mixture is not entering. the cylinder or the mixture is too thin. If there is a lot of oil leaking from the oil switch, the mixture is too rich. The reason may beThere is a problem with the oil supply system, or the starting method may be incorrect and may need to be restarted.
4. Remove the high voltage wire from the spark plug and test for fire. If there is no spark or the spark is very weak, the magneto or high voltage wire is defective. the spark is strong, it means the spark plug is defective or the cylinder is leaking and the mixture is poor. Confirm whether the spark plug can work normally, if not, it should be replaced in time.
5. It is difficult to start a gasoline generator. New machines require a certain break-in period. A qualified generator is not worn out, but damaged, so it is better to start the generator once a month. .-2 times.
Hello, there are several reasons why the engine cannot start a fire, and it has nothing to do with too much engine oil. Firstierly, the instrument light does not come on when the key is turned, the starter makes no noise and there is no sign of the car starting! At this point you need to determine if the battery is running out of power. Usually the battery can only be used for two to three years! In this case, the problem can be solved by replacing the battery or asking someone to supply electricity.
Second, the starter makes a sound and the sound is low. The battery may be running. power off, or it starts. Pattern damaged! At this time, turn on the headlights if the brightness is sufficient and the horn sounds, it is generally a problem coming from the starter! You can try hitting the starter with a stick, maybe it will start.
Third, the starter is noisy. But I just can't get in the car! There are many reasons, including damageat the oil pump, lack of fuel injection, ignition system failure, incorrect timing, crankshaft position sensor failure, water temperature sensor failure, sensor failure camshaft position, anti-theft work, insufficient cylinder pressure. Troubleshooting in Steps