Not the same.
1. Purpose: Roofing wire mesh is mainly used to reinforce and protect roofs, walls, etc. buildings, and is generally used to prevent cracking and falling of tiles or other roofing materials. Underfloor heating steel mesh is mainly used in underfloor heating systems to help support and fix underfloor heating equipment, and to provide appropriate reinforcement strength and bearing capacity.
2. Features: Roofing steel mesh generally has high corrosion resistance to cope with wind and rain in the outdoor environment, and it also needs to have a certain tensile strength to resist wind pressure, etc. The steel mesh of the floor heating should have good thermal conductivity and high temperature resistance to ensure that the systemFloor heating system can conduct heat normally while meeting tensile strength requirements.
What is the formula to calculate the weight of the underfloor heating mesh?
Yes. Floor heating mesh, also known as floor heating mesh. During transportation, it is necessary to prevent the floor heating mesh from getting wet by rain. This would cause the styling glue to fall off on the mesh surface and the mesh surface would be restored. It should be stored in a sheltered place and should not be exposed to rain. The function of the underfloor heating mesh is to improve the overall strength of the insulation board and facilitate the installation and fixing of heating pipes.
Method for calculating the theoretical weight of steel
Conversion formula
Method for calculating the theoretical weight of steel (unit: Kg) < /p>
Angle steel: weight per meter =0.00785*(lside width + side width-side thickness)*side thickness
Round steel: weight per meter =0.00617*diameter*diameter (same as rebar and round steel ) < /p>
Flat steel: weight per meter = 0.00785*thickness*side width
Pipe: weight per meter =0.02466*wall thickness*(outer diameter-thickness of wall)
Plate: per square meter Weight=7.85*thickness
Brass tube: weight per meter=0.02670*wall thickness*(outer diameter-thickness of wall)
Copper tube: weight per meter =0.02796*wall thickness* (outer diameter - wall thickness)
Aluminum pattern plate: weight per square meter = 2.96*thickness
Specific gravity of non-ferrous metals: copper plate 8.9 brass plate 8.5 zinc plate 7.2 lead plate 11.37
The calculation formula for non-ferrous metal plates is: weight per square meter = density * thickness