People always think that foreign products are the best. In fact, the most advanced instrument for detecting floor heating leaks is in Xi'an, China. This is currently the most professional floor heating leak detection equipment - Jilong Floor Heating Pipe Leak. Point locator.
Let's use an example to explain
1. Confirm whether the floor heating is leaking by pressing and confirm the leaking circuit
When you suspect that your floor heating is leaking, you can use the pressure test method to confirm whether the heating pipe through the floor is leaking (note that the water pressure test must be carried out). In the event of a water leak, you can use the same method to detect the circuit leak.
2. Determine the floor heating leak point
Use instruments and equipment (Geelong Floor Heating Leak Point Locator) to detectthe leak circuit and determine the leak point;
3. Partially open the floor
After determining the location of the underfloor heating leak point, carry out an excavation partial. The size of the excavation surface must be adapted. facilitate the pipeline repair operation. When excavating soil, use caution and familiarize yourself with the direction of the pipeline to avoid further damage to the pipeline.
4. Repairing floor heating pipes
When repairing floor heating pipes, the material of the pipe should be clear . Those that can be hot connected should be connected by hot melt method (such as PE-RT, PB pipes), and those that cannot be hot connected (like PE-X pipes) should be connected by joint in star. or snap ring type.
5. Pressure Test
After repairing the leaking pipeline, perform a pressure testsion on the repaired pipeline loop.
Backfilling and restoration of the floor
After pressure tests and confirmation of the absence of water leaks in the problematic circuit, the floor heating pipes were backfilled and the ground restored.