Epoxy glue. Epoxy resin glue is generally used for laying van floor glue. This glue has the characteristics of high strength, wear resistance, corrosion resistance, etc. It can effectively fix floor glue and improve the stability and durability of the floor. In addition, you can also choose polyurethane glue, acrylic glue and other installation materials. The appropriate glue should be selected according to the specific situation.
Can we drill holes in the bottom of the Wuling Rongguang van?
Floor glue is mainly used to clean the interior of the car. My previous Changhe didn't have one, and. it was difficult to clean it if it was very dirty. I often shopped on Taobao and bought a set of floor glue. When I got back, someone put it down. It was very easy to clean and the one I bought was molded. It's agenre which is all in one piece, entirely placed on the bottom of the car. Why don't you go see the one I bought on Taobao? It seems to be called Qingyang Car Decoration. If the wording is wrong. Just ask around and you should have them all. Search the store and enter the name and you should be able to find them. It's been a long time and I don't remember it clearly. I think I bought it for less than 100 yuan. When I come back, let someone put it down for 50 yuan.
Yes. Drilling Steps:
1. Use the special Torx key for Cruze cars to remove both front and rear seats. Note that there are wires under the main driver's seat. You need to unplug the plug and then remove it. . Seats.
2. No key is needed to remove the rear seat. Simply push it forward and backward to pop out the rear seat.
3. The floor glue is bifurcateded at the front and joined at the rear, roughly placing it in the correct position.
4. Before covering the floor, remember the screw holes, air conditioning outlets and other wiring ports on the floor.
5. For the opening of the floor glue in the next step, cut out holes of the same size and position them on the floor glue according to the holes on the floor.
6. Install the seat and you're done.