Many friends usually use their cars in poor environments, and their car mats are often dirty. They want to equip their car with a set of easy-to-maintain floors. However, many people cannot tell the difference between car floor mats and floor mats. First, let’s talk about the difference between floor mats and floor mats.
The difference between car floor rubber and carpet
Floor glue: Floor glue makes generally refers to a layer of rubber laid on top of the car platform. A plastic protective cushion. There are two types of floor glue. One is cut on site by an automobile beauty workshop and has several qualities. Poor quality plastic smells bad. The other is dedicated to one-off casting cars. This type of floor glue fits better and is more practical and convenient.s beautiful to install. When installing floor glue, the vehicle seats must be removed, making installation difficult.
Floor mats/carpets: Floor mats and car carpets are actually the same thing. The fabric of the mat is suede, thick or thin, and the other is plastic or rubber, transparent or opaque. Plastic rugs are easier to clean than suede rugs, but they don't look as stylish.
Is it necessary to modify the car floor?
It depends on the specific situation. If you often have to use your car in dirty or wet places, adding a layer of floor glue can have a good waterproof and dirt-repellent effect, making it easier to clean the vehicle interior. If you usually drive in urban areas, there is no need to change the car floor adhesive. After all, modifying the glue offloor requires removing all the seats from the car, which is relatively tedious to install.
How to apply car floor glue?
1. First, remove all seats from the car. Note that if your front seat is an electric seat, you will still need to unplug it first then remove the seat
2. Use a vacuum cleaner to vacuum; all power seats in the car Dust and debris, make sure there is no excessive dust in the car;
3. Apply floor adhesive suitable for the original factory in the car; , then use a tool to install the seat onto the seat mounting holes. Cut the floor glue
4. Press the edge of the floor glue into the plastic under the threshold. You can break a small gap and put it in the floor glue. Finally, install the seat.
@2019