When you buy a new gasoline generator, you should check whether it has any defects in appearance, whether there is a certificate, instructions, tools and sheets.
First add the engine oil and gasoline. (The engine oil must be filled to the designated position, otherwise the machine will not operate if not filled.)
The gas tank switch must be turned to the position power off switch must also be turned to the start position and the power output switch must be turned off.
Turn the shock absorber to the closed position (when starting the car when the car is cold, turn the shock absorber to the closed position for easier starting).
Pull the starter pull plate (first pull it several times to let the gasoline flow into the carburetor), and finally pull the starter pull plate firmly (if it it is a delectric start, the engine can start directly).
After starting the machine, turn the damper to the opposite position (i.e. open the damper). Check whether the machine is operating normally, whether the voltage is within the normal range, whether there are any abnormal noises coming from the machine, etc.
Close the switch and send power.
Taiyuan Angelida Mechanical and Electrical Equipment Co., Ltd.
Whether it is gasoline generator or diesel generator , the principle and power of the generator are the same.
There are two sets of coils inside the generator. One is the excitation coil, also called the magnetic field coil, which is used to generate a magnetic field after being energized. The other is also the armature coil. called rotor, which is generated by rotating and cutting magnetic lines of force. The circuit diagram of the generator is the sfollowing:
As shown in the circuit diagram, the generator output line has three terminals, namely the magnetic field terminal, the voltage output terminal and the ground wire. Terminal.
As shown in the figure, the magnetic field terminal should be connected to the magnetic field of the voltage regulator, and the voltage output is connected to the battery and electrical equipment.