Pacific Automotive Network may be due to the engine oil system not being smooth. You need to check if the engine oil system is fluid. If you hear a grinding noise coming from the fuel injector, this proves that there is no problem. with the oil circuit. The following inspections should be performed before each use of a gasoline generator to ensure safe and normal use of the generator. If the generator is not used for a long time (more than a month), the starter battery will lose power due to self-discharge. Please use an external charger to charge the battery.
Solutions for generator failed to start:
1. First check if the engine oil and gasoline have been added recently. Otherwise, they were added to the engine. oil and gasoline must be drained and replaced again. Engine oil and gasoline are only valid for three months.Oil and gasoline used for more than three months have lost their viscosity and are useless.
2. Check if the engine oil and gasoline in the generator are filled. Otherwise, the generator will not turn on or start.
3. If the above conditions are met, check whether the spark plug ignites. Otherwise, remove the spark plug and put gasoline on it before reinstalling it to see if the generator fires. , it would be good if it started with the ignition. (Photos/Text/Photos: Zhang Fengxue of Pacific Automotive Network)
1. Check the battery status. 2. Check the condition of the gear. 3. Check the condition of the spark; spark plug and ignition coil; 4. Add quality guaranteed gasoline. 5. Check the serviceability of the engine and gearbox.
The reasons why the vehicle catches fire without igniting: 1. The bearings of the water pump, air conditioning compressorsation, clutch, generator, steering pump and belt tensioner are damaged; Or the ignition coil is defective; 3. The engine is idling; 4. The soft flying crown skates; 5. Battery is insufficient; 6. There is a problem with the quality of the gasoline.