The Mercedes-Benz C180 generator does not generate electricity. Repair Method: Generally, the generator assembly needs to be replaced. 1. The maintenance of Mercedes-Benz generators that do not produce electricity can be divided into two aspects: First, if there are mechanical problems with the generator, such as damaged bearings, the bearings need to be replaced. However, replacing bearings is risky and can. easily damage the generator housing, so the assembly is usually replaced. Second, if the carbon brush is worn to the limit, it can be replaced individually. 2. Mercedes-Benz parts are relatively expensive, so even the maintenance costs are not low. After all, there is a risk of damaging the generator housing during maintenance. Once damaged, the assembly cannot be replaced, so the overall generator repair cost is high. inaround 300, and replacement of the whole. The general cost is around 600, and it will be more expensive if you use the original one.
What is the reason for the difficulty in starting the Mercedes-Benz engine?
The reason why the Mercedes-Benz Smart does not respond to start and reports that the generator has no excitation.
1. The battery voltage is too low: you can turn on the headlights and some electrical equipment. During the startup process, check to see if the instrument and room lighting dims significantly. If the confirmation turns dark, it means the battery voltage is insufficient and cannot bring the engine to starting speed.
2. Excessive carbon deposits in the intake pipe: Excessive carbon deposits will reduce power and be accompanied by some increase in fuel consumption, since obtaining the same power as before thecarbon deposits, greater power is obtained. Opening the throttle increases the corresponding fuel supply. There is carbon deposit in the air duct, which will affect the normal air intake of the engine. Carbon deposit will block the air intake, resulting in insufficient engine air intake. When the engine air intake is insufficient, the engine power output will be unstable. Remove the intake pipe from the car and use special tools to remove carbon deposits, or use cleaning products to remove carbon deposits accumulated in the intake pipe.
Common reasons for engine starting difficulty: 1. Ignition difficulty caused by carbon deposits in the car, accompanied by a slight jerk at idle. Clean the throttle, clean carbon deposits in the intake tract and. clean the fuel injector. 2. The energy of lightingage of the spark plug is low In order to save money, some car owners do not replace the spark plug after the maintenance period, which will cause misfire when the energy d The ignition of the spark plug will drop significantly. Current engine models mostly use direct injection into the cylinder, which is harmful to the spark plug. The demands are even higher. 3. Insufficient low pressure in the fuel line. Insufficient oil pressure in the low pressure oil line directly causes the engine to fire twice. The specific reason is that the first ignition fails because the low pressure oil line increases the oil pressure, and. the second time it may catch fire. Specific parts to check: fuel pressure regulator, fuel pump, fuel filter element and internal lines. 4. Loss of powere battery Loss of battery power is more common. Generally, when the car cannot start, the car owner's first reaction is that the battery is dead. The solution is also very simple, just find a car or another battery to power it. 5. The exhaust pipe is blocked. Exhaust pipe blockage usually happens rarely unless it's a coincidence or someone is playing a prank, but this situation is relatively easy to detect. 6. The mixture is too rich or too thin. Many experienced auto repairers know a secret. What should I do if the car won't start and there are no problems with other parts? The old master will spray the detergent on the accelerator and start the car, and the car will start easily without trying repeatedly (it is not recommended for car owners to do it themselves).7.Engine timing is incorrect. If the engine timing does not match, the engine will definitely not start the car. Additionally, many car engines use timing belts. The timing belt itself has no drawbacks. Just replace the generator. belt with certain types of engines. This can cause the car to jump out of gear at any time, preventing the car from touching the ground. The problem of car starting difficulty is mainly caused by insufficient car maintenance by drivers, and car maintenance should be carried out regularly and quantitatively.