Why does the diesel generator stall after starting?
There are many reasons why a diesel generator stalls after starting, such as the speed gradually decreases, operation is unstable, and white smoke is emitted from the exhaust. This phenomenon indicates that there is water in the diesel. , the cylinder seal is washed or it is automatically damaged by decompression, etc.
During automatic shutdown, operation is continuously unstable and accompanied by abnormal knocking noises. This phenomenon is a sudden mechanical failure. Common causes include: broken crankshaft, broken piston pin, loose or broken connecting rod bolts. , the valve lock part, the valve circlip falls off, the valve spring breaks or the valve stem breaks, causing the valve to fall, etc. Once such a situation is discovered in the generator duringt work, it must be stopped immediately for inspection to avoid causing a major mechanical accident. It can be sent to the relevant maintenance point for complete inspection.
There are more than one or two reasons why a diesel generator stalls after starting. When a problem occurs, a solution must be found based on the specific cause.
If the user is unfamiliar with the defects and handling of the device, he or she should contact the manufacturer's after-sales service in time!
There are many problems with startup stalling: 1. Whether the air is exhausted properly; 2. Check whether diesel, engine oil and water have been added. If that's not the problem, ask a master. to check it. It can start but right away I don't think it's a big problem if you turn the engine off. Some ignition points are wrong and there are many problems. Heis difficult to judge without looking at the device.