Can be achieved. A 100 kilowatt generator is a common generator. The speed can reach 10,000 rpm and the current is 100×4.5454A=454.54A. Its total power can reach 100 kilowatts, and it is one of the most used generators in industrial applications. The 100 kilowatt generator has a relatively large appearance, with a volume of about 1.5 meters high, 2.5 meters wide and 2.5 meters long. The average weight is 6.5 tonnes.
Why can't the phase of the 10000 diesel generator be checked when connected to the grid?
The start of the kt10000led generator is the start of the main engine. The small generator can manually start the original internal combustion engine (gasoline engine), and the internal combustion engine drives the generator to generate electricity. By relying on the energy stored in the battery, the starter causes the internal combustion engine to start.dull and the internal combustion engine drives the generator to produce electricity. Some generators can accept power from the grid, start as an engine, and then rely on an external energy source to produce electricity. The car's alternator is the car's primary source of power. Its function is to power all electrical equipment (except the starter) and to charge the battery when the engine is running normally (above idle speed).
1. The phase order of the power grid is inconsistent with the phase order of the diesel generator, which will cause the grid connection to fail. At this point you need to check whether the phase order of the power grid is consistent with the phase order of the generator. If they are not consistent, you need to adjust the phase order of the generator to be the same as that of the power grid. , or adjust the phase sequence of the networkelectrical so that it is the same as that of the generator.
2. Wrong connection in phase order inside the generator will also cause grid connection failure. At this point you need to check if the wiring inside the generator is correct. If it is wrong, you need to rewire it.