It must be a unit. If a diesel generator or gasoline generator is placed, the engine room should be well ventilated. The floor must be smooth and non-slip. The inside diameter of the unit's exhaust pipe. should not be smaller than the diameter of the exhaust port of the diesel engine. The elbow should not exceed 3. The bend angle should be greater than 90 degrees, and the exhaust pipe should have supports or lifting brackets to ensure that the unit muffler, compressor, etc. are not stressed.
It is necessary to support the mass of diesel engines, generators and other auxiliary components, so that these masses are distributed over a sufficient area to avoid settlement and absorb the unbalanced forces generated by the 'unit during operation; These disturbances depend on the size of the unit structure, the rotation speed and the mass of the composing. If the mass is insufficient, the operating vibrations of the unit will be greater.
Detailed information:
The unit room must have good ventilation, sufficient lighting and must be equipped with guaranteed lighting, insulation and fire-fighting facilities; the temperature of the engine room should not exceed 30°C in summer and should not be lower than 10°C in winter. The power distribution room of the engine roomoil must be reliably grounded and provide first-level lightning protection.
Baidu Encyclopedia - Diesel Generator
No, use metal pipes. According to the China Industry Network, it is not possible to use plastic pipes for oil lines in diesel generators. Metal pipes should be used for oil lines in diesel generators. It is convenient to use copper pipes, which are easy to bend. The joints between the oil lines, engine and fuel tank can use high pressure oil lines and be tightened with one or two hose clamps.