1. First, measure the size and shape of the platform to determine the size and quantity of rock slabs required.
2. Then calculate the required number of rock slabs based on the height and thickness of the platform.
3. Finally, the required number of rock slabs can be determined by considering the wastage rate and cost of cutting the slabs.
Is the slate back wall made of the same material as the floor?
1. First check the connection method near the bottom or side of the drawer. There are sliding rails or. connecting rods. These connecting parts must be dismantled or untied.
2. Then use the appropriate tools (such as screwdrivers, wrenches, etc.) to disassemble or detach the connecting parts. Save all screws, nuts and other parts for future installation.
3. Then remove the broken drawer from the slide or connecting rod, being careful not to damageother parts during disassembly, and install the new drawer onto the slide or connecting rod in the same way. Make sure the drawers are flat and connected properly to other components.
4. Finally, reassemble and secure all the connecting parts to ensure that the drawer is securely fixed to the floor and can slide smoothly.
How to dismantle slate flooring if you don't want to?
Otherwise, the biggest highlight of the whole house is the design of the slate TV background wall, which is simple. and beautiful, and has a marble feel. Generally speaking, the slate TV background wall is matched with the floor table, abandoning the traditional TV cabinet, which looks more fashionable. A wooden grill is added to the left side, which makes it look less monotonous. The texture of the rock slab does not make people complicated. The decoration is finished, everything is cleaned inside and outlaughing, and there are many green plants on the ground, which can play a certain role in the interior space, and the effect is quite good.
Stone slabsare particularly prone to chipping. If you want to dismantle them, you must call a professional.
Depending on the adhesive used, there are three common methods for removing tile rock: 1. You can spray glue remover on the bonding area and use a blower. hot air to soften glue stains. , then use force to remove it. 2. If marble glue is used, you can use a saw blade to slowly cut the glued area, and it can be removed after loosening. 3. If you are using glass glue, you can insert a utility knife into the glued area and start cutting from one corner.