Precautions for car maintenance in winter are as follows:
1. Exterior Vehicle Care: On fall mornings there is a lot of dew and the surface of the car is often very wet. There are obvious scratches on the surface of your car. If there are scratches, you should spray paint in time to prevent the scratched parts from getting wet and rusting. In addition, due to rain acid corrosion in summer rain and direct sunlight. In summer, the car paint will inevitably be oxidized. When the season changes, you'd better clean and polish your car surface.
2. Tire maintenance: Tires are the “feet” of the car and play a key role in the safe operation of the vehicle. In summer, due to high temperature, tire pressure should be checked frequently. Do not make it too high, otherwise there will be a risk of bursting.tire. In autumn, due to the relatively low temperature, the tire. The pressure must be replenished to maintain the air pressure within the specified range. At the same time, you should also check the tires for scratches, because rubber tends to harden and become brittle in autumn and winter, and tires are prone to leaks. or even punctures. Additionally, inclusions in tire treads should be cleaned regularly.
3. Engine Compartment Maintenance: In the fall, you should always check the engine oil, brake oil and antifreeze in the engine compartment to see if the oil is sufficient, if it has deteriorated and if it is time. for replacement. These oils are like The blood of your car must be replaced during the replacement cycle to ensure smooth circulation of the oil.
4. Brake System Maintenance: Always check to see if the brakes areweaken or move apart, if there is a change in the pedaling force of the brake pedal and clean the entire brake system line if necessary.
5. Maintaining Heating Pipes and Fans: As the weather becomes cooler in the fall, white frost appears when the temperature is low. This season, you should pay special attention to whether the defrost outlet is located under the radiator. the windshield blows normally, if the heat is enough, and if there is a problem, solve it in time, otherwise it will cause dangerous factors for your driving.
6. Maintenance of air intakes, air intake grilles and electronic fans: Always check for debris in these parts, you can use compressed air to blow the dust. Additionally, when the engine cools down, you can use a water gun to flush the above parts from the insideoutwards.
7. Air conditioning maintenance: The weather is hot and the temperature is high in summer, and car air conditioners are often overloaded. Also, since it rains a lot in summer, cars often run. some roads ford, causing contamination of the lower part of the air conditioner condenser. A lot of sediment, over time, will cause the condenser to rust, thus shortening the life of the air conditioner. Therefore, in autumn this is especially the case. It is important to maintain your car's air conditioner.
8. Battery maintenance: In the fall, the electrode wiring of the car battery is the most likely place to cause problems. During inspection, if you find green oxides on the electrode wiring, be sure to wash them with it. the boiling water. Green oxides will cause insufficient power in the generator, causingnt a loss of battery power. In severe cases, the battery will be scrapped or the car will not be able to start.
9. Interior Maintenance: Due to the high temperature and rain in summer, many bacteria breed in the carpets, floor rubber and other hidden places of the car. With the arrival of autumn, the car windows. If it is no longer turned on frequently, the air in the car will become cloudy and odors will appear. The smell and bacteria harm human health. Therefore, when the season changes, it is necessary to carry out thorough indoor sterilization. of your car and clean. When maintaining, it is best to use a professional cleaning agent with a high temperature indoor sauna. This will not only remove dirt and odors in the car, but also effectively kill bacteria. After cleaning, use a protective agent totake care of the car. interior. This will give your car interior a whole new look. Here we recommend the full-effect interior cleaner from Chinap. Its environmentally friendly formula is rich in neutral surfactants, which can naturally break down various stubborn stains and deeply clean objects. Its neutral formula can eliminate static electricity and keep it clean for a long time. does not contain acid, alkali and bleach, does not damage the surface of clean objects, has natural aroma, does not produce any harmful gases, has rich foam, and can achieve ideal results in various temperature environments. cleaning surfaces of fabrics, plastics, leather, wood and other objects.
In addition, door shafts and guide rails are prone to rust due to the impact of wind, sand and car washing, and will produce abnormal noises when operating. opening and closing. Thisproblem can be solved by regularly applying an anti. -anti-rust oil on it.
What is the definition of the automotive aftermarket?
Car manufacturers are equipped with a “Regular Car Maintenance Item Schedule” when each car leaves the factory. Maintenance items and cycles are usually formulated based on mileage traveled. The goal is to ensure the maintenance of the car. lifespan thanks to regular maintenance. Optimal performance and extended car life.
Different manufacturers and models have different items and maintenance cycles. Therefore, you must carry out the maintenance and maintenance of your car in accordance with the on-board maintenance schedule.
For example, the image below shows the regular maintenance schedule for a certain car brand.
The automotive secondary market is a benchmarkthis to the various services surrounding the use of the car after the sale of the car. It covers all the services that consumers need after purchasing a car. That is to say, it is a general term for a series of transactional activities generated around the various needs and subsequent services in the after-sales use of the car, from its sale until its disposal.
The first classification of the automobile aftermarket was based on the order of front and rear sales of complete vehicles. The automobile aftermarket industry is called automobile aftermarket. The automotive aftermarket can be roughly divided into seven main industries: the automotive maintenance industry; the automobile financing industry; the automobile maintenance industry (automotive stores, beauty, quick repair and accessories workshops); and the sp industryautomobile ort; the used car and car rental industry.
Detailed information:
Three companies in the automotive aftermarket
< p >Automotive beautyAutomotive beauty includes three main elements: car surface beauty care, car interior renovation care and advanced care.
(1) Car watch beauty care: waterless car wash, delicate foam car wash, fully automatic computer car wash, chassis cleaning, paint stain treatmentTreatment, treatment through paint spraying, new car waxing, oxide layer removal, paint sealing, paint scratch treatment, polishing and renovation, metal parts brightening, tire brightening and anti-slip, glass polishing and other projects.
(2) Maintenancecar interior renovation: car ceiling cleaning, door cover cleaning, dashboard cleaning and maintenance, peach wood cleaning, velvet cleaning, carpet deodorization, plastic interior cleaning and maintenance, cleaning of leather seats, complete vehicle leather maintenance and other projects;
(3) Advanced beauty care: paint sealing, paint coating, car sauna, chassis sealing, ozone disinfection , scratch repair and other projects.
Car decoration
Car decoration is mainly the decoration of new cars. Its main items include: complete vehicle film, floor glue, floor mats, fenders, armrest boxes and trunk opening appliances. mahogany interior, installation of wheel arches, anti-collision strips, replacement of handles, installation of bowlse door, installation of weather shields, installation of exhaust outlets, plus leather seats, luxury sunroofs, soundproofing projects requested by some customers, etc. .
Car maintenance
Car maintenance mainly includes daily maintenance and additional maintenance. Routine maintenance is a must-have item, while additional maintenance is something customers choose to do;
Daily maintenance items mainly include changing engine oil, l adding antifreeze, replacing the third filter, replacing the windshield wipers and transmission. Stop leaks, clean and replace brake pads, check air conditioners and add Freon, check battery fluid level, battery maintenance, etc. ;
Additional items mainly include: cleaning without dismantling the combustion system, non -lubrication system disassembly cleaning, cooling system disassembly cleaning, computer detection and decoding, generator maintenance, engine maintenance, exhaust compliance and other projects
Reference materials: < /strong>