Approximately 0.9 cubic pea stones. Usually, one square meter of underfloor heating backfill requires 0.015 cubic meters of pisolite, because one square meter of underfloor heating backfill requires cement, sand and pisolite, and the quantity ratio is 1: 2:3. Assuming the thickness of the embankment is 0.03 meters, the total volume is 0.03 cubic meters. The volume of each portion is 0.005 cubic meters, so we can calculate that pisolite is 3 times 0.005 equal to 0.015 cubic meters. Then multiply it by 60.
I would like to ask if a piston is needed for underfloor heating backfill
8 to 12. < /p>
Northern floor heating generally uses 8-12mm natural pisolite, because the surface of 8-12mm pisolite is smooth, without edges and corners, and the particle size is uniform.
Pisolite refers to a kind of modern-day building material. It isa stone the size of a soybean. It is generally used for floors and roofs. The particle size is similar to mung beans and is called stone powder in some places.
After finishing the underfloor heating, is it okay to lay pisolite first?
It is not possible to backfill the underfloor heating without pisolite. Pay attention to the ratio of pisolite cement. the general ratio is 1 (cement) to 2 (pea stone) better than 2 (sand). Be careful to leave expansion strips around the room. The day after backfilling, sprinkle water on the backfill layer for curing.
The reason for using pisolite is that the heat generated by the floor heating pipes must also be dissipated. Try using pisolite or guarmistone. The leveling layer will contain many bubbles, forming gaps, and heating. will follow him.
For more information on whether or not a plunger is required for underfloor heating backfill, please enter: https://m.abcgonglue.com/ask/a4004e1615827579.html?zd for show more content
Floor heating backfill Which is better, ceramsite or pea stone?
As long as you strictly follow the construction process, you will be fine. Mix the cement, sand and pisolite evenly in proportion, then spread them evenly on the pipe. Bury the underfloor heating pipe at least well, about 3 to 4 cm. Choose a manufacturer with reliable quality and good reputation for pea stone, because the quantity will not change after one use, so the quality should be good. The quality of floor heating pea stones from Shandong Yihe Pebbles is good and trustworthy. The floor heating pebbles of Linyi Cobblestone production base are also very good and are generallynt packed in 50 kg woven bags. The bulk density of pisolite is approximately 1.7 per cubic meter. Why is pistone used for underfloor heating backfill? Shandong floor heating pisolite manufacturers wholesale and retail, with uniform specifications and particle size standards. It is the industry leader of floor heating embankment pisolite, Shandong Yihe.
The backfill material for underfloor heating can be ceramsite or pisolite, both of which have certain advantages and disadvantages.
Ceramsite is a porous clay-based material. It is lightweight, has low water absorption, good air permeability, and is not prone to mold growth. Its use of backfill in floor heating system can better promote ground heat dissipation, more uniform conduction and radiation,and improve the temperature stability and stability of the floor heating system.efficiency.
Pisolite is a natural granular mineral material with strong thermal inertia, which can maintain the heat of the underfloor heating system to a certain extent. Pisolite also has good drainage properties and is often used to improve soil structure and increase the air permeability of the soil.