The thermal energy of carbon fiber is not transmitted through the medium, but far infrared light waves are radiated inside the human body, and the thermal energy is directly transmitted to tissues and organs of the human body. 2. The biggest feature of carbon fiber heater is that the amount of electromagnetic radiation is extremely small, which is smaller than that of metal wire after shielding against electromagnetic waves and is harmless to the human body. 3. Thermal conversion rate is about 60% higher. 4. Long service life: Due to the characteristics of carbon fiber, it is corrosion resistant and durable. Metal heating wires are prone to aging, corrosion and a short lifespan. Carbon fiber electric floor heating is based on the inherent characteristics of carbon materials and has the propertiesporous, voluntary and multiform summers of textile materials. Both ends are pressurized to conduct electricity, so that electrical energy is quickly converted into thermal energy. and the heat is emitted by far infrared radiation to achieve a heating effect. This is how carbon fiber electric underfloor heating works. Carbon fiber electric floor heating is fundamentally different from ordinary electric floor heating. Regular electric floor heating relies on resistance wires to generate heat and conduct it through conduction. The disadvantage is that the conversion rate of electrical energy into thermal energy is lower than that of carbon. fiber electric underfloor heating. Floor heating by heating cable:
1) Advantages: one wire in each room is connected in series without joints, the probability of repair is low, the service life islong, there is no electromagnetic radiation and the furniture can be avoided during installation.
2) Disadvantages: high electromagnetic radiation, resistance wire heating, easy aging, power consumption, linear heating, small heating area, wound wire condition, cannot avoid furniture without legs such as beds when paving. to cause a local temperature superposition. If one line in each room is connected in series, if one part fails, the entire system in the room will be paralyzed.
Carbon fiber floor heating:
1) Advantages: Carbon fiber floor heating can be divided into long fiber floor heating and long fiber floor heating by short fiber soil. It is also non-metallic underfloor heating and. is relatively safe. Long fiber underfloor heating is installed in wires under the floor.
2) Disadvantages: due ton the shape of the coil, the ground temperature difference is relatively large, and the skin of the plastic wire is prone to aging at high temperatures. Short fiber floor heating generates uneven heat and causes significant aging after long-term use. The cost is high and the joints must be treated strictly.
The above has their advantages and disadvantages, you can choose according to the actual situation of your home.