How to disassemble the Buick GL8 alternator
Disassembly of the Buick GL8 alternator: First park the vehicle on level ground, open the hood, remove the screws inside, then lift the roof and remove the armor, then remove the engine oil catcher, then remove the generator. The automobile generator is the main source of power for the car. Its function is to power all electrical equipment (except the starter) and charge the battery while the engine is running normally (above idle speed). According to the automobile industry standard of the People's Republic of China QC/T73-93 "Automotive electrical product model compilation method", the composition of automobile alternator models is as follows: 1. Product code The product code is represented by Chinese letters. For example: JF - ordinary alternator JFZ - integrated alternator (integrated regulator) JFB - JFW alternator with pump - albrushless ternator 2. Voltage level codes are represented by Arabic numerals. Example: 1 represents 12V system, 2 represents 24V system, 6 represents 6V system 3. Current category codes: 1, 2, 3, 4. Current category code (a): < 19, 20~ 29, 30~39, 40~49, 50~59, 60~69, 70~79, 80~89, ≥90. Indicated by Arabic numerals depending on the product order. 5. Warp code The alternator will adjust the arm position as a warp code. When viewed from the driving end, the left side of the adjustment arm is shown as Z, the right end is shown as Y, and the middle is unmarked.