This problem is usually caused by the oil circuit, because when you restart there is no problem, which means the circuit is OK, otherwise it will not be so easy if it is the case, it is generally the carburetor and. spark plug, as this is usually caused by the oil supply system having been stored too long, causing gasoline to leak into the steel body or reduce gasoline and it does not There is no oil at the start. Extinguish your spark plug after storing it for a while. Looking at the gasoline content above, it's usually relatively dry, but if yours seems wet, you can adjust your spark plug gap appropriately to make it wider. short circuit caused by gasoline and coal base. If it's particularly dry, take a taxi and try to see if there's a problem with the candle's fire. If there is no problem, clean itcarburetor. to clean the carburetor and replace the spark plug! ! !
The coil is connected to the igniter.
According to Toutiao's information, the connection method of the two wires on the 190 generator carburetor is that the coil is connected to the igniter, one end of the high voltage box is connected to the igniter, and the other end is connected to the negative pole.
The carburetor is a mechanical device that mixes a certain proportion of gasoline with air under the vacuum generated by the engine.