If the hand pull plate of the gasoline generator is broken, it is generally recommended to replace it.
Specific solutions are as follows:
1. The hand rope is broken.
Answer: If the hand rope is broken, you can directly replace the hand rope, which generally costs one or two yuan each. There is no need to disassemble the internal structure of the traction plate, just roll it up directly. You can also take it directly to a store that sells generator parts and ask a technician to help you repair it.
2. The generator hand-operated plate buckle is broken
Answer: If this is the problem, you can directly replace the hand-operated plate. Generally, hand-made dishes are not very expensive, costing tens of yuan. You can buy it in a physical store or online. The installation is tvery simple. Just align the screw holes and install directly. The direction of the manual handle is backwards (it is convenient to pull it with the right hand.)
3. The hand-operated plate is inelastic
Answer: If the hand-operated plate is inelastic, it is also recommended to replace it directly if it falls, the spring inside is broken. This is generally replaced without accessories.
Precautions for use: When using the manual traction plate, be sure to pull and release it gently. Pull lightly on the pull plate to lock the motor before starting the unit. Do not pull forcefully on the traction plate. start, as this will easily damage the card buckle. Do not release the handle directly after starting, otherwise the rebound may damage the housing and handle. Careful use can prolong life.