1. Generator is not connected properly: Check to see if generator lines are properly connected, including power cords and ground wires.
2. Generator Failure: The replaced generator itself has problems and needs to be retested or replaced.
3. Low Battery Power: Low battery power may prevent the generator from operating properly and the battery may need to be charged or replaced.
4. Power system failure: The power system may not operate properly due to damage to other components, such as voltage regulators, fuses, etc.
The working principle of Jinbei single-wire generator
The reason why you say it doesn't generate much power is probably because the output voltage is low. It is best to have a multimeter. to check this problem. Turn the multimeter on the plaDC voltage ge. When the engine does not start, the battery voltage is normal between 12V and 13V. Start the engine, keep it at medium speed, and do not turn on any electrical appliances. . The battery voltage is normal between 13V and 14.8V. Then keep the speed, turn on the air conditioner and headlights. The voltage should not be lower than 13 V. Otherwise, there is a problem with the generator or the vehicle's electrical appliances are overloaded and the generator does not have enough power.
Principles of electromagnetism. Jinbei single-wire generator is a DC series motor. In AC circuit, the principle is electromagnetic principle. The excitation current and armature current change at the same time to produce torque in the same direction. of the load, which gives rise to the Jinbei single-wire generator. A generator is a mechanical device that converts other forms of energy into electrical energy.