Stop the engine and let it cool, then open the engine hood and find the generator belt in front of the engine.
2. Press the belt between the pulleys to check its tension. If pressed more than 1/2 inch, a loose belt will affect generator performance and even damage the generator. belt.
3. Remember the installation position of the car alternator belt and the applicable flexing sequence of each engine wheel.
4. Tighten the tension wheel with an adjustable wrench and press (loosen the generator adjustment bolt and adjust the pivot bolt).
5. Check the generator belt for oil or grease contamination, turn the belt over to check for cracks in the inner layer, missing rubber parts and slippage, if there are stains oil on the timing belt. , etc. (The image shows the Changan Onu generatoro. The belt passes through the distribution box).
6. Move the generator outward to loosen the belt (move the generator inward to loosen the belt).
7. Strip the generator belt from the pulley, then remove the generator belt.
8. Compare the removed old belt with the new belt and install the new belt after confirmation.
9. Press the belt with your hand and check the tightness of the belt (pull the generator outward until the belt is tight, ensure that the generator belt is installed in the appropriate position and strictly adjust the pivot according to the manufacturer's instructions (bolt).
10. Start the engine to check the results of the repair, and recheck the belt tightness after stopping the engine. p>