Based on the phenomenon you mentioned, it is certain that there is a leak in the live wire in your house (or the live wire is in contact with the ground wire). Find an experienced electrician to check it carefully. Here is an analysis of the phenomenon:
It should be fine if the hot and neutral wires of the safety device are reversed. The original live wire becomes the neutral wire, and the original neutral wire becomes the live wire. However, when the switch is moved to the neutral side, the live wire is connected directly. When dealing with light bulbs, the neutral wire should not be connected when the switch is not on. but it lights up just a little. This is because the neutral wire (original live wire) is leaking and grounded, forming a loop through the ground wire, so the lamp lights up a little. You notice that the connection is reversed and you reestablish it. At this momentThere, the live wire leaks directly and the switch cannot be closed at all.
Why does the electric shock safety device trigger as soon as it is turned on?
The current thermal effect phenomenon, but the battery is not not thermal. It's because of the high-. The current battery supplies energy, that is, the inner circuit cells, which results in a strong chemical reaction. The thermal effect of current is: When current passes through a resistance, electricity consumes current as energy and generates heat. This phenomenon is called thermal effect of current. Practice has proven that the current flowing through a conductor and the heat generated by the resistance value of the conductor itself and the current flowing through it are proportional to the square multiplied by the current. This is the conclusion reached by British and Russian scientists Joule Len, and is calledJoule Len.
It will consume electricity: because the tripping is caused by the relative resistance formed by the leakage of the phase line and the earth wire. To check, turn off all electrical appliances or unplug the outlet and turn it on. again, if it still trips, it's leak protection. Otherwise, just turn on or plug in each device one by one until it goes off and you'll know which one. Another possibility is that the security device is overloaded. Are you doing well! !