The reasons why the gasoline generator stalls after ignition for a period of time are:
1. Sensor: Disconnect the oil sensor connection cable and the gasoline engine can start. the oil change sensor.
2. Ignition System Problems: Disconnect the spark plug to start and observe the condition of the spark. White and red sparks are normal; If there is no spark, replace the spark plug or igniter.
3. Fuel system problems: Check to see if water has entered the fuel. If water has entered, clean the carburetor with gasoline. Determine if the cylinder is full of fuel. Determine whether there is an oil leak in the oil supply pipeline, change the position of the shock absorber, and see if it can start.
4. Problems with the air distribution system: Disconnect the spark plug and press fePress the air filter hole with your fingers. If there is no compressed gas escaping after several periods of idling, it means there is a problem with the power conversion system and gas distribution system.
1. The extinguisher switch is not activatedand the extinguisher wire is shorted. Lack of automatic oil protection.
2. Sensor: Disconnect the oil sensor cable and replace the oil sensor if the gasoline engine can start.
3. Ignition system problems:Disconnect the spark plug and start the engine without loading, and observe the spark if it is white and red, replace it. no spark, replace spark plug or igniter.
4. Fuel systemproblems: Check to see if water has entered the fuel. If water has entered, clean the carburetor with gasoline. PouTo determine if fuel has entered the cylinder, disconnect the spark plug and press the air filter hole firmly with your fingers. Dry the engine several times and smell the fuel with your fingers. Determine if there is an air leak in the oil supply channel and change the position of the shock absorber to see if it can start.
Precautions for gasoline generators
Please note that the generator should be installed in a place out of reach of passers-by and children.
Never place flammable objects near the exhaust vent when the generator is running.
The distance between this generator and buildings or other devices should be kept at least 1 meter. Otherwise, the generator will overheat. Do not cover the dust cover while the generator is running.