Ito Power is happy to answer your question. If you want to determine if a gasoline generator's spark plug is intact, you must first look at the half-crescent shaped portion under the gasoline generator's fuel tank cap. It's the spark plug! Remove the spark plug and insert it into the black cap. The threaded end rests on the sticker. If the pull plate cannot pull, it means it is broken.
How long do car spark plugs typically last?
The specific steps for replacing spark plugs in portable generators are as follows:
Tools required: screwdriver, socket.
1. When disconnecting the high voltage wire connector, be gentle. Do not shake the spark plug insulator forcefully during operation, as this may easily damage the sealing performance of the spark plug.ie.
2. The motor can be disassembled after cooling. After loosening the spark plug, use a thin hose to blow out the dirt around the spark plug to prevent dirt from falling into the combustion chamber after unscrewing the plug.
3. The area around the screws, spark plug electrodes and gaskets must be kept clean, dry and free of oil, otherwise it will cause electrical leaks, air leaks, weakening of sparks and d other defects.
4. When installing, use a sleeve to align the spark plug with the screw hole, and gently screw it in by hand. After tightening it to about half the total thread length, tighten. the lever with additional force. If the hand is not smooth when twisting, go out and check if the threads are aligned or if there are any impurities trapped in the threads. Do not tighten blindlyt to avoid damaging the screw holes and damaging the cylinder head.
5. Tighten to the required torque. If it is too loose, it will cause air leakage. If it is too tight, the gasket will lose its elasticity, causing air to leak.
How to install spark plugs in Senjiu generators
It is necessary to refer to the maintenance cycle of the specific model. In fact, it's not just about the specific model's maintenance cycle. the life of the spark plugitself, but also the life of the spark plugUsed on different models and engines, its use and maintenance cycles are also completely different. Therefore, all car owners should take a look at their car's service manual to see what is written there.
The most common nickel alloy spark plug, which is also the most commonly used inhe family cars, has a lifespan of around 20,000 to 30,000 kilometers. Although his performance is very ordinary, his greatest. The advantage is that it's really cheap. You can buy one for only a few dozen yuan, and you won't feel bad if it breaks, so many people choose to buy this type of spark plug.
In addition, platinum spark plugs can in principle be used for 3 to 5 years. They are considered relatively good quality spark plugs. Better yet, dual platinum spark plugs contain platinum in the center electrode and side electrodes. , which has a longer lifespan and can be used for around 80,000 kilometers. In addition, the quality of iridium spark plugs is better and there will be almost no major problems after about 100,000 kilometers.
Excessive use of lightersage and damage will impact the car:1. Leak or misfire
The first is the possibility of a leak or misfire. An electricity leak won't shock anyone. If there is a misfire, our engine will run unevenly. After all, no matter how big our car is, it is a three-cylinder engine. is broken, other work coordination will not be good.
2. If the temperature is too high, the motor will explode.
When the operating temperature is too high, the motor will explode. It's the equivalent of hiccups when we eat. Sometimes hiccups are uncomfortable and make walking unstable. As for hiccups, or detonations, in a car, if it is severe, it is possible that the entire engine cylinder will be torn out, which would destroy the car.
3. Carbon deposits are seriously aggravated and fuel consumption is increased
If the wrong type of spark pluge is used in our relatively powerful engine, it is very likely that the whole car will have seriously aggravated carbon deposits and fuel consumption will increase very quickly.
How to install spark plugs in Senjiu generators:
1. Open the engine cover and remove the engine panel. You can usually see the cylinder line. The number of cylinders in the engine depends on the number of cylinder lines.
2. Pull out the steel wire directly by hand, but be sure to note that one cylinder wire corresponds to one spark plug, and remember the order of pulling the cylinder wires.
3. Use an extension socket to unscrew the spark plug.
4. Just install the new spark plug, but the spark plug gap is very large. If the gap is too small, it will burn easily. If the gap is large, the ignition will become. weak oreven misfires. The general deviation is 0.7-0.9mm.
Morijiu generators are produced by Morijiu (Chongqing) Machinery Co., Ltd. The company was established on June 20, 2019, with a registered capital of 5 million yuan, and its legal representative is Li Kai. Its address is located at No. 21-22, Building 4, No. 5, Torch Avenue, Jiulongpo District. , Chongqing.