How to connect Lifan 150 lines to Zongshen 200 lines requires clear lines.
1. Connect the red wire from the key fob to the positive battery terminal, the black wire to the negative terminal, and the ignition lock output power to the green wire.
2. There are two extinguisher wires, either positive or negative, and the output and input parts are positive and negative for the ignition system.
3. The yellow and black wires from the igniter are connected to the high voltage box, the blue and white wires, the positive trigger electrode, and the green and white wires.
4. Trigger the negative electrode, white and black wires, connect to the black and white, black and red wires of the ignition lock, connect to the generator low voltage output, green wire and ground wire.
5. There are two extinction wires, whether positive or negative, and the output and input parts are positive and negative for thee ignition system.
6. Connect one extinguisher wire to the negative pole of the coil and the other to the positive pole. Follow the procedure to connect the line.