The gasoline generator often stalls automatically during operation. There are several reasons. One is a lack of oil, the other is a blocked oil circuit, the third is too high body temperature, and the fourth is too heavy a load. These situations will cause the gasoline generator to automatically stall during operation.
If the machine is not very old or old, it is recommended to replace the spark plug and carburetor. If it is certain that the spark plug is not the fault, it is recommended that the oil supply line is not slick and cleaned or replaced.
Detailed information:
1. Drain all gasoline from the fuel tank and carburetor;
2. housing
3. Add new engine oil to the upper limit of the oil level on the oil dipstick
4. Close the choke and pull the starter handle to where resistance is felt;
5. Wipe the device clean and cover it with cardboard or a plastic cover to prevent dust.
Do not turn off the engine or refuel, as air will be present.
Gasoline generators are generally composed of stators, rotors, end covers, bearings and other components. The engine is a machine that converts chemical energy into mechanical energy. Its conversion process is actually the work cycle process, it burns the fuel in the cylinder to generate kinetic energy, which drives the piston of the engine cylinder to reciprocate. It drives the connecting rod connected to the piston and the crank connected to the connecting rod to perform an alternating circular movementyew around the center of the crankshaft to produce power.