There are many problems with startup stalling: 1. Whether the air is vented cleanly; 2. Check whether diesel, engine oil and water have been added. If that's not the problem, have a master come pick it up. a glance. If it can start but immediately stalls, I assume the problem is not serious. Some ignition points are wrong and there are many problems. It is difficult to judge without looking at the unit for a while.
The reasons why the diesel generator stalls after starting
There are some. four main reasons:
First, there is no oil;
Second, the oil circuit is blocked;
Third, the body temperature is too high;< /p>
Fourth, the load is too great.
If the machine is not very old or old, replace the spark plug and carburetor. If the machine takes a long time, you need to replace the spiston segment.
Precautions before using the gasoline generator:
1. Check if there is enough gasoline in the fuel tank. ?
2. Check the fuel valve and oil line for oil leaks. ?
3. Check if the oil level is between the upper and lower limits. ?
4. Check the quality of the engine oil to determine if it needs to be replaced. ?
5. Check whether the battery starting voltage is higher than 12V and observe whether the battery appearance is damaged or leaking. ?
6. If the generator is not used for a long time (more than a month), the starter battery will lose power due to self-discharge. An external charger must be used to charge the battery.
Why does the diesel generator stall after starting?
There are many reasons why a diesel generator stalls after starting, such asAs the speed gradually decreases, operation is unstable and white smoke is emitted from the exhaust. This phenomenon indicates that there is water in the diesel. , the cylinder seal is washed or it is automatically damaged by decompression, etc.
During automatic shutdown, operation is continuously unstable and accompanied by abnormal knocking noises. This phenomenon is a sudden mechanical failure. Common causes include: broken crankshaft, broken piston pin, loose or broken connecting rod bolts. , the valve lock part, the valve circlip falls off, the valve spring breaks or the valve stem breaks, causing the valve to fall, etc. Once such a situation is discovered in the generator during work, it should be immediately stopped for inspection to avoid causing a major mechanical accident. It can be sent to the maintenance point cindicated for a complete inspection.
There are more than one or two reasons why a diesel generator stalls after starting. When a problem occurs, a solution must be found based on the specific cause.
If the user is unfamiliar with the defects and handling of the device, he or she should contact the manufacturer's after-sales service in time!