No.
(1) More advanced gas stoves are equipped with safety alarm settings, that is, when the gas leaks after the flame goes out, the whistle will sound immediately and the gas outlet switch will be automatically turned off. . This type of gas stove cannot be lit with a lighter.
(2) There are many reasons why a gas stove cannot light. The igniter may be broken or there may be no gas. But if the igniter is only broken, we can't just use one. lighter to ignite it, because at that point the gas is vented to the outside all the time. You don't know how much gas is escaping at that point. In this case, after ignition, all places containing gas will be captured. fire and it will catch fire instantly, and there is a risk of explosion.
(3) Gas stoves cannot be lit with lighterss, but gas stoves can. If the gas stove cannot be ignited, it is usually because the battery is dead or the battery is low, causing the solenoid to turn on. the gas stove valve closes, so I can't light it with a lighter.
(4) Because when the gas valve is open, the gas is always vented to the outside. You don't know how much gas is escaping at that point. In this case, after switching on, everything. places containing gas will catch fire. And if it catches fire instantly, there is a risk of explosion.
(5) We must always keep gas appliances in good condition and perform timely maintenance. If we find that a gas stove cannot be ignited, we must immediately contact the relevant personnel to resolve the problem. In addition, when using gas appliances, interior ventilation must be fully ensured in order to maintainenough oxygen to avoid gas poisoning.
Can I light a match with a gas stove
Why does the color of the gas stove flame change?
In daily life, many people only pay attention to the firepower when using gas stoves, but ignore one problem: the color of the gas stove flame.
Some people say: "The gas stove at home has Sometimes it is a blue flame, sometimes it is yellow, but no matter what color it is, it can be used for cooking." p>
Actually, the flame color of the gas stove is light blue under normal conditions or red, it means the gas stove is malfunctioning.
So why the. does the color of the flame change?
1. The flame turns yellow
The flame turns yellow, this indicates that the gas is not completely burned and that the causeis a lack of air. Under normal circumstances, the flame starts to turn yellow from the tip, and when the yellow part of the flame increases, black smoke will be produced.The yellow flame will cause the carbon monoxide in the combustion gas to exceed the standard during combustion and pollute the environment, causing danger. It will also darken the bottom of the pot and reduce combustion efficiency.
When yellow flames appear, should you adjust the position of the air regulating plate handle at the bottom of the stove to increase the air inlet?
2. Green or other colors
The flame appears green or other colors usually due to a flame reaction.
Flame reaction refers to the reaction that causes the flame to show a characteristic color when certain metals or their compounds are burned in a colorless flame.
Some gas ranges uses copper-plated parts, which will oxidize and pollute the cooker after prolonged use. The flame color reaction of copper oxide is generally green, so sometimes the flame appears green, then just clean the stove in time.
Also, you will sometimes see the flame turn red when cooking. This is because soy sauce and other condiments are added when cooking and the air is humid. This is a normal phenomenon.
p>
Flames of different colors represent different working states of the gas stove, and we can also judge the failure of the gas stove through flame conditions
1 The occurrence of flame separation or extinction<. /p>
Flame or fire extinguishing is mainly caused by too high gas pressure and gas outlet speed higher than the combustion speed, causing the gas to partially or completely separate.a flame from the fire hole. Leaving the flame is often a precursor to going out, and going out often causes the flame to go out.
If the gas pressure is too high due to too much mixed air volume, you should adjust the position of the air plate at the bottom of the gas stove to reduce the volume air inlet. If the output power of the pressure reducer is too high, the pressure reducer should be adjusted or replaced
2 Let go and extinguish the flame
There is a fire. when the gas stove is on, but it turns off when you let go. There are usually 3 points.
1. The thermocouple is incorrectly positioned or there is too much carbon deposit. It is necessary to adjust the position of the thermocouple and clean the carbon deposit. 2. The incorrect position of the damper causes the flame to fly away. The damper plate needs to be adjusted to make the flame stable and the thermocouple can detectkill the flame. 3. The flameout protection device has failed over time and needs to be replaced.
3. The flame is short and weak
When the pressure reducer or burner nozzle is clogged. , the gas will not flow easily, the burning flame is weak and weak. At this time, you should use a fine steel wire to clean the nozzle or adjust the pressure reducer
4. The flame is of different heights
This is because the fire cover. and the fire hole are blocked and the fire cover must be removed. Cleaning
Yes
Gas stoves with open flames can light matches
. Gas stoves without flame protection can also be used with a match. According to new national standards, gas stoves must have a flame protection function. Without the battery, the ion igniter solenoid valve cannot be operated.re opened and it cannot catch fire. As for the thermocouple type igniter, its solenoid valve relies on the voltage of the thermocouple to maintain the solenoid valve in a closed state. You must press and turn the ignition switch valve and light it with a match at the same time before you can do this. be inflamed. Or remove the solenoid valve to supply air, then use a match or lighter to light it. However, this is not safe without flame protection.