Is it harmful to people if the plastic of the badminton court is placed directly on the cement floor

Introduction Is it harmful to people if the plastic of the badminton court is placed directly on the cement floor? Generally, floor glue is spread on the sports floor, which can reduce the damage to the human body. 1. The badminton room has a parquet floor. deemed qua

Is it harmful to people if the plastic of the badminton court is placed directly on the cement floor

Generally, floor glue is put on the sports floor to reduce damage to the human body

1. Standards for badminton parquet flooring

The conditions for judging a qualified sports parquet floor. are: Six indicators: the minimum bearing load of the sports floor must be 2,500 N; the rebound capacity of the sports floor is ≥ 90%; the coefficient of friction of the sports floor is between 0.4 and 0.6 m; the performance of sports flooring is ≥53%; the relative vertical deformation rate of sports flooring is ≤15% at W500; the standard deformation of sports flooring is ≥2.3mm.

Qualified badminton hall wooden flooring has good bearing capacity, vibration absorption capacity, and also has the advantages of wear resistance and anti-slip, reflecting good sports and protection functions. Environmentally friendly materials and will not harm the human bodynot. Sports parquet is also a very durable material and has a long lifespan.

2. Rubber flooring requirements for badminton halls

Sports rubber is a kind of rubber specially developed for sports venues using polyvinyl chloride materials. advantages of ultra-light, ultra-thin and wear-resistant, waterproof, moisture-proof and non-slip, high elasticity and super impact resistance, flame retardant, sound-absorbing and sound-absorbing. In addition to being widely used in basketball. courts, badminton courts, table tennis courts, volleyball halls, handball courts and gymnasiums. It can also be used in shopping malls, office buildings, conference rooms, supermarkets, hospitals, kindergartens, schools, corridors, stairs, etc.

Precautions for purchasing badminton court parquet, performanthese of the parquet of the badminton court and maintenance of the floor glue

The badminton court is a rectangular court with a length of 13.40 meters. Doubles The width of the court is 6.10 meters and that of singles is 5.18 meters. The width of each line on the field is 4 centimeters and the measurement must be measured from the outer edge of the line. It is best to draw the boundaries of the land in white** or other easily identifiable colors.

Schematic diagram of a standard badminton court

According to international competition regulations, the minimum space above the entire court is 9 meters. In this height, there must be no beams or anything else. obstacles. The perimeter of the field is 5 meters. There should be no obstacles inside. There must be a minimum distance of 2 meters between two juxtaposed courts. The walls around the pitch are preferably dark and should notwind not be exposed to the wind.

Name of badminton floor rubber

Thickness 4.5mm-8.0mm

Width 1.42m/1.8m

p>

Length 15m/20m

p>

1.2mm or 1.5mm wear-resistant layer

Material 100% PVC raw material pure

Disposable technical scratch paint

Durable structural layer, fiberglass layer, reinforcement layer, foam buffer layer surface style lychee pattern, grain pattern sand, wood grain, bark pattern, glossy surface, grid pattern color red, green, blue, gray, **, packaging waterproof kraft paper and plastic film Advantages of roll packaging type Anti-aging, wear-resistant, high elasticity, quiet

Advantages of PVC sports flooring:

1) Green and environmentally friendly: the main raw material for production PVC plastic flooring is polyvinyl chloride, which is a renewable resource respecEnvironmental killer and non-toxic. 2) Ultra-light and ultra-light; thin: the weight is only 2 per square meter. 3kg, less than 10% of ordinary floor materials. 3) Super wear-resistant: special wear-resistant layer, high wear resistance coefficient, normal service life up to 8~. 10 years ; 4) High elasticity and super impact resistance: excellent hair. The foam layer increases the cushioning and recovery properties of the floor, thereby reducing the damage caused by the floor to the human body. 5) Super non-slip: wear-resistant; The layer on the PVC plastic floor surface has special anti-slip properties and is even more anti-slip when exposed to water; 6) Flame retardant: The flame retardant performance is second only to stone, it is self-extinguishing when leaving the fire, and is flame retardant and does not produce toxic and harmful gases; 7) Waterproof and moisture resistant: it is made of PVC, with excellent waterproof performance and moisture resistance. 8) Sound-absorbing and anti-noise: sound absorption; can reach 20 decibels, widely used in quiet places such as hospitals and libraries; The structure of PVC sports flooring: The structure of WanAo PVC sports flooring: 1. Bogao badminton sports flooring is made of TPU treated surface layer, wear-resistant PVC . layer, 1000D It is composed of a mesh reinforced with glass fibers and a special layer reinforced with fabric fibers and a PVC foam buffer layer. 2. ≥ WanAo PVC sports floor rubber is a 100% pure layer of wear-resistant PVC with a thickness of 1.5mm. It is treated with anti-aging and fixing technology, is resistant to wear and pressure and has a service life of. up to 10 years. 三≥ The fiberglass-reinforced mesh of the sports floorWanAo Wan'ao PVC yew and the special mesh fabric fiber reinforced layer play a role in stabilizing the size of the ground and extending its service life, so that the ground never shrinks and its Performance is more stable, allowing athletes to perform at their best level. 4. ≥ The material of WanAo Wan'ao PVC sports floor rubber closed PVC foam buffer layer has an air cushion structure, which provides absolute safety, resilience and standard vibration absorption, with a vibration absorption rate of 50%. (International standard: DIN>45%) Application scope of PVC sports flooring: 1) Sports venues: basketball courts, badminton courts, table tennis courts, volleyball courts, tennis courts handball, gyms, dance studios, yoga venues, martial arts gyms, etc. 2) Business places: hotels, shopping centers, office buildings,conference rooms, supermarkets, hospitals, etc. 3) Other places: kindergartens, schools, corridors, stairs, etc. For the floor arrangements of the activity room, we recommend that you choose Yichen Special PVC sports floor glue for activity rooms. The performance and higher costs of WanAo Wan'ao PVC professional sports flooring are undoubtedly the best choice for mid-to-high-end indoor activity halls and arenas. The comfort of WanAo Wan'ao PVC sports flooring: 1. ≥ The wear-resistant PVC surface pattern design of WanAo Wan'ao PVC sports flooring, and the soles are always tight to the ground , non-slip and can transmit strong power at will. 2. ≥ The surface layer of WanAo PVC sports floor has been specially treated to match the brightness of the light. It will not absorb light or reflect glare, and littlet better protect athletes' eyes and make it less likely to cause fatigue. 3. ≥WanAo万AOPVC sports flooring has a combination of user-friendly design, unique site color, non-slip and extremely responsive texture, anti-scratch, and the PVC foam buffer layer developed with new technology provides protection reliable for healthy sports and provides professional athletes, provides excellent sports buffer protection for ordinary sportsmen, which can minimize athletes' injuries. Mobility of WanAo Wan'ao PVC sports floor: The ergonomic design of irregular circular texture arc edges on the surface of WanAo Wan'ao PVC sports floor makes the slip coefficient the best value, allowing athletes to have a better mobility. It provides extremely explosive elastic. power structure for various professional and violent technical movements such asstart, jump, slide, brake, etc. WanAo Wan'ao PVC Sports Floor Rubber is Green and Environmentally Friendly: WanAo Wan'ao PVC Sports Floor Rubber has high-tech antibacterial functions and is non-toxic, odorless, green, eco-friendly Environmental, waterproof, non-slip, antifungal. and other properties. Using this product will make your activities more enjoyable. The space is safer and healthier.

Everyone wants to have a healthy body and badminton is a sport that is good for physical and mental health. With the improvement of modern living standards, many people no longer just play badminton on the court, but go to badminton gyms to exercise. Since sports wood flooring is the preferred basic material for modern badminton halls, it can significantly improve the efficiency and comfort of the badminton hall and is equalement linked to the overall quality of the badminton room. Therefore, in order to meet the growing domestic demand for sports hall wood flooring and improve the quality of badminton halls, many gymnasiums choose high-quality and leading badminton hall wood flooring, which has become a concern for many people today. So, what should we pay attention to when purchasing badminton court parquet? What are the daily maintenance and glue maintenance of parquet flooring for badminton courts?

1. What should we pay attention to when purchasing badminton room parquet?

Wooden flooring for badminton room is a highly professional building material, so price is not the main consideration. Consumers must first take into account the reputation of the brand, the quality of the parquet, the environmental friendliness of the materialand installation technology.

Wooden flooring for badminton rooms should choose a brand with quality assurance and reputation. Another factor is the choice of parquet material. Some high-quality raw materials, although relatively expensive, are very resistant to corrosion, wear and moisture and have a long service life. Finally, it depends on the parquet production process. Careful workmanship and internationally advanced production technology embody the quality of parquet.

2. Performance of badminton court with wooden floor

1. Good ball rebound performance;

2. Can effectively resist earthquakes, reduce vibration and sound insulation;< /p>

3. The unique elastic cushions provide unique elasticity and resist heavy pressure on the hard maple floor, reducing injuries caused by impact caused by thes athletes bouncing on the ground.

Third, care and maintenance of the wooden floor of the badminton court.

1. The badminton room floor should be cleaned daily to extend the life of the floor. If the floor has ordinary stains, wipe them with a damp cloth. Clean dust from the floorUse a clean cotton mop or soft-bristle brush to remove it carefully. Dusting of the badminton room parquet floor should be adjusted accordingly depending on the frequency of use of the parquet floor.

2. Secondly, the floor keel is the wooden structure closest to the surface of the board, so it needs to be treated when cleaning the wooden floor. Professional anti-corrosion treatment should be used in the materials, which can not only prevent the parquet from rotting due to moisture, but also prevent infestations of termites and other insects.harmful sects. The specific method is as follows: Place a layer of moisture-proof, corrosion-resistant and insect-proof insulation mat on the keel. Insulating pads can also provide the overall floor structure with better cushioning and shock absorption.

3. Keep the floor dry and clean and avoid contact with large amounts of water. It is not allowed to scrub with alkaline water or soapy water to avoid damage to the paint film. a pure cotton mop that has been wrung out of the water. If it encounters dirt, use steel wool to scrub the marks. Do not wipe with gasoline to avoid any risk of fire.

4. Apply wax from time to time. The method is to wipe the floor with a semi-dry cloth and apply it evenly to the floor surface and allow it to penetrate lightly. Dry, use a soft cloth to wipe the floor. Rub with haut down until smooth and translucent. If water spills on the floor, it must be wiped up immediately. Do not expose it to direct sunlight or use an electric stove to avoid drying too quickly and cracking the floor.

5. The floor after paving should be protected from direct sunlight to a minimum, and the paint should be exposed to too much ultraviolet rays, which will cause premature drying and aging.

6. Do not throw cigarette butts or matches on the floor to avoid burning the floor surface, scratching them with sharp objects or applying strong pressure for a long time.

7. If the painted floor will not be used for a long time, do not cover it with a plastic cloth or newspaper. The paint film will become sticky and lose its shine over time. do not directly contact the parquet with high temperature objects.

IV. Care and maintenance of badminton floor glue

1. Sand and Gravel Protection: A sand and gravel protection mat should be placed at the door of the room or hall where the badminton floor is located. glue is used to prevent the shoes from being damaged. Bringing sand and gravel into the room will scratch the floor surface;

2. Protection of moving objects: When moving objects, especially when there are sharp metal objects inside. at the bottom, do not drag them on the ground to avoid the ground shrinking.

3. Protection against fireworks: Although the badminton floor is a fireproof floor (B1 level), it does not mean that the floor will not be burned by fireworks. Therefore, when people use badminton floor, do not place burning cigarette butts, mosquito coils, electrified irons and objectsmetal high temperature directly on the floor to avoid damage to the floor;

4. Regular maintenance of sports floors: badminton floor glue Use a neutral detergent for cleaning. Do not use strong acidic or alkaline detergents to clean the floor.

  • Popular Focus
  • Where is the cheapest battery wholesale?

    Where is the cheapest battery wholesale in Tangxia, Sanyuanli, Baiyun District? There is an enterprise specializing in the independent production of electric vehicles in Tangxia, Sanyuanli, Baiyun District, Baiyun Sanyuanli Avenue, Baiyun Sanyuanli Street
    08-02
  • Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. How to reduce it to 4.8V/4.4A?

    Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. I personally think it is impossible to reduce it to 4.8V/4.4A. Because the discharge platform of lithium batteries is generally set
    08-10
  • What are the materials of the negative electrodes of lithium batteries?

    What are the materials of the negative electrodes of lithium batteries? The main commercial applications of lithium batteries include graphite, which is a sheet of copper used to guide current and which does not react. another safe
    08-02
  • The difference between 18500 and 26500 batteries

    What is the difference between 18500 and 26500 batteries? The answer above is 18650. The person asking the question should ask what is the difference between 18505 and 26500 batteries. In the case of Fuant ER1
    08-02
  • What does 3.7V 80mAh written on a lithium battery mean?

    What does 3.7V 80mAh written on a lithium battery mean? 3.7 V, 80 mA = 0.08 A, H means 1 hour, or 3600 seconds. Taken together, it is
    08-02
  • How long does a lithium battery (cell phone battery) last?

    How long does a lithium battery (cell phone battery) last? The lifespan of mobile phone batteries, under normal conditions of use and without serious impact, the lifespan set by the manufacturer must be 5 years.
    08-02
  • Will lithium batteries explode when charging?

    Will lithium batteries explode when charged? Will lithium batteries explode when charged? Lithium battery explosions usually occur during the charging process, because the negative electrode material of lithium batteries is graphite or other carbon materi
    08-02
  • Parameters of lgdas31865 lithium battery

    Parameters of lgdas31865 lithium battery The parameters of lgdas31865 lithium battery are as follows: LGDAS31865 is a model 18650 lithium battery with a capacity of
    08-02
  • What are the main components of lithium battery electrolyte?

    What are the main components of lithium battery electrolyte? The composition of lithium battery electrolyte is shown below. 1. Ethylene carbonate: molecular formula C3H4O3. Colorless transparent liquid (>35℃), room temperature
    08-02
  • Who are the lithium battery manufacturers in Shandong?

    What are the lithium battery manufacturers in Shandong? Shandong Shengyang Power Supply Co., Ltd. and Shandong Weineng Environmental Protection Power Technology Co., Ltd. 1. Shandong Shengyang Power Supply Co., Ltd. is located in Shengyang, Qufu City.
    08-02
  • Types of drone batteries available in 2024

    Part 1. Types of drone batteries available in 2024In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in
    07-30
  • How long does it take to charge 26650 battery?

    How long does it take to charge a 26650 battery? The charging time for a 26650 battery is generally between 3 and 6 hours, but the precise time depends on the power of the charger and the capacity of the battery. in general
    08-02
  • For what?Sure, here's an article based on the phrase "For what?

    The simple yet profound question, "For what?" often serves as a gateway to deeper reflections on purpose and intention. It is a query that invites us to delve into the reasons behind actions, decisions, and circumstances that shape our lives and the wor
    08-02
  • Choosing the Right Cart Battery

    This comprehensive guide will walk you through everything you need about cart batteries, from understanding different types to making an informed purchase decision.
    08-02
  • 30mAh~500mAh 3.7 V Li-ion Battery

    Welcome to Ufine's collection of 3.7V lithium-ion batteries ranging from 30mAh to 500mAh. Explore a diverse range of compact and lightweight batteries suitable for various electronic devices,
    08-02
  • Here are 10 essential facts about drone batteries for 2024.

    10 Key Facts About Drone Battery for 2024 In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in the consumer, commercial, and industrial sectors. Below are the primary types of drone batteries avai
    08-02
  • Could you please explain the difference among IMR, ICR, INR, and IFR 18650 batteries?

    What is the Difference Between IMR, ICR, INR, and IFR 18650 Battery?In 18650 batteries, discerning the differences among IMR, ICR, INR, and IFR types is fundamental for tailored and efficient battery usage. These distinct
    08-02
  • Safety considerations for cart batteries

    Selecting the ideal cart battery is crucial for ensuring optimal performance and longevity of your electric vehicle or vaping device. This comprehensive guide w
    08-01