Cleaning, leveling, scraping and paving.
1. Cleanup: Clean gravel, wood chips and debris from the floor.
2. Leveling: Mix cement and sand in proportion and level the entire floor or use a self-leveler to level the floor.
3. Scrape off the tile adhesive, completely scrape the tile adhesive about 5mm thick (serrated) onto the leveling layer.
4. Paving: The back of the rock slab is completely scraped with 5mm thick tile adhesive (sawtooth seams) and laid on the floor with tile adhesive. Press to make it flat. divide the cross for space and use an adjustment cross for local leveler adjustment.
How to dismantle slate flooring if you don't want to?
Otherwise, the biggest highlight of the whole house is the design of the slate TV background wall, which is simple. and beautiful, and has a marble feel.Generally speaking, the slate TV background wall is matched with the floor table, abandoning the traditional TV cabinet, which looks more fashionable. A wooden grill is added to the left side, which makes it look less monotonous. The texture of the rock slab does not make people complicated. The decoration is completed, everything is cleaned inside and outside, and there are many green plants on the ground, which can play a certain role in the interior space, and the effect is quite good.
How to replace slate floor drawers if they are broken
Stone slabsare particularly prone to chipping if you want to disassemble them. them, you need to ask a professional to do it.
Depending on the adhesive used, there are three common methods for removing tile rock: 1. You can spray glue remover on the bonding area and use a sohot air blower to soften glue stains. , then use force to remove it. 2. If marble glue is used, you can use a saw blade to slowly cut it off at the glued area. Once detached, it can be removed. 3. If you are using glass glue, you can use a utility knife to insert it into the glued area and start cutting from one corner.
Whether the slate floor is generally a full wall or a half wall
1. First check the connection method near the bottom or side of the drawer. There are sliding rails or connections. These connecting parts must be dismantled or untied.
2. Then use the appropriate tools (such as screwdrivers, wrenches, etc.) to disassemble or detach the connecting parts. Save all screws, nuts and other parts for future installation.
3. Then remove the broken drawer from the slide or connecting rod, being careful not to damage other parts during disassembly, and install the new drawer onto the slide or connecting rod in the same manner. Make sure the drawers are flat and connected properly to other components.
4. Finally, reassemble and secure all the connecting parts to ensure that the drawer is securely fixed to the floor and can slide smoothly.
Half wall. First of all, the size of the platform should be determined based on the specific interior structure and area of the building. The height of the standard university platform is 200 cm to 300 cm. If you want to store more items, you can increase the height slightly. The width of the platform cannot exceed 800 centimeters. Any wider width will not look great, and will be very space consuming.