Car manufacturers are equipped with a “regular car maintenance program” when each car leaves the factory. Maintenance items and cycles are usually formulated based on mileage traveled, with the goal being to get the best performance from the car through regular operations. maintenance and extend the life of the vehicle.
Different manufacturers and models have different items and maintenance cycles. Therefore, you must carry out the maintenance and maintenance of your car in accordance with the on-board maintenance schedule.
For example, the image below shows the regular maintenance schedule for a certain car brand.
1. Car wash
If the automobile beauty industry is divided into two ends, car wash is the front, and beauty and decoration are the rear. END. The car washing process is divided into 7 steps:preparing, collecting the car, washing the car, foaming, wiping the exterior of the car, wiping the interior of the car and inspection. Car wash towels need to be sorted and processed. Do not use a single cloth all the way, as towels used to wipe the lower bodywork contain a large amount of fine sand that cannot be washed off. These towels can easily scratch the bodywork. car paint.
2. Waxing
Waxing is one of the methods of porcelain counterfeiting, and it is also an automobile beauty process. Before waxing, you should pay attention to two aspects: firstly, the selection of wax and secondly, the operation. Wax selection should be based on the protection needs of the automobile paint. Try to carefully select according to the different functions of automobile wax andcharacteristics of automobile paint, so that the effect is more obvious. The waxing operation is generally carried out after washing the bodywork.
3. Polishing
Polishing can remove the oxidation layer on the paint surface, surface scratches, loss of gloss caused by oxidation and other problems that affect the appearance of the surface paint. Car polishing is the process of beautifying the car. The car is polished before waxing, sealing or coating. Because the glaze coating must be polished first and the car must be finely polished before it can have a mirror surface. This is a necessary operation to seal the enamel.
4. Glaze sealing
Glaze sealing refers to the use of soft wool or sponge to pass through the high-speed vibration and friction of the vibration polishing machine, inUsing the unique permeability and adhesion of the varnish to seal the varnish molecules penetrates strongly into the car surface and paint gaps. Glazed body paint can reach or even exceed the effect of the original car paint, making old cars updated and new cars more shiny. It also has the characteristics of high temperature resistance, waterproofing, anti-oxidation, gloss enhancement, water resistance and. corrosion resistance.
5. Coating
The beauty of the coating is the highest measure to protect the paint surface. It can avoid oxidation and perform multiple functions such as brightening the paint surface, acid and alkali resistance. oxidation and resist ultraviolet rays. Generally, when recoating a car, the paint becomes discolored and itsafe due to aging and the oxide layer formed by years of corrosion will be removed at the same time. It can increase the hardness of the paint surface and prevent small scratches and halos. It is also the one that lasts the longest, approximately over a year.