Shenzhen Huima International specializes in the export of various batteries and electric scooters. Packaging requirements for battery products (Germany has a special line for double customs clearance):
1. Lithium batteries must be packaged without a box. - Box packaging, but each battery should be packed in anti-static packaging or bubble bags and placed in a carton no more than 1 in a box. No piece exceeds 25 kg.
2. Battery model is not limited. The outer box must be clean and sturdy. Ears cannot be cropped. **One side should not be less than 2/3. sheets of A4 paper.
3. Dry batteries require honeycomb partitions or compressed packaging, and lithium battery packaging can also be used.
4. Outer packaging: Do not use yellow tape or cut off the ears. The cardboard must be solide, neat and clean.
The requirements for international express delivery of pure batteries are as follows:
1. Accept all unbranded lithium batteries, dry batteries, car balance batteries, mobile power supplies and other independently packaged products. with a power less than 100W.
2. The product name on the invoice must be battery. The declared parameters of the battery on the invoice cannot exceed 100 watts
3. If the soft battery is not connected, for other uncertain batteries or packaging, photos can be sent to confirm delivery, price.
Hello friends, it's very difficult to export batteries now. You'd better know what to pay attention to and which channels to use. I found some on Baidu and put them on the Hongfusheng Freight website. . Some shipping information has been compiled for yourreference.
1: The battery must meet the requirements of UN38.3 test and 1.2 meter drop packaging test.
2: The outer packaging must be labeled with a Class 9 dangerous goods label and Marked with UN number< /p>
3: Its design can prevent bursting under normal conditions of transport and is equipped with effective measures to prevent short circuits external.
4: Robust outer packaging, the battery should be protected to avoid short circuit, and contact with conductive substances that may cause short circuit should be avoided in the same packaging
< p>5: The battery is installed in the device Additional requirements for transport: The equipment must be secured to prevent movement inside the package and packaged in a manner to prevent accidental activation during transport. The outer packaging must be waterproof, or waterproof in use.izing an inner liner (such as a plastic bag), unless the structural features of the equipment itself are already waterproof, etc. You can also check with Hongfu Sheng for more details, which will be helpful for you to get your goods out.