Extruder problem, check the extruder. The reason why the density on the left and right sides of the lithium battery slot extrusion machine is high on one side and low on the other is due to an extruder problem. If one side of the extruder is worn or poorly adjusted, it will cause problems. to inconsistent material extrusion. The solution is to check and adjust the position and pressure of the extruder to ensure equal amounts of extrusion on both sides.
What you want to ask is, what is the cause of the pole piece deviation problem in the lithium battery coating furnace? Reasons include uneven oven temperature, vibration or shock during transportation.
1. Uneven oven temperature: Uneven temperature distribution in the oven can cause the pole pieces to heat unevenly during the baking process, causing deviation of thepole pieces. This could be due to uneven heating elements inside the oven or poorly designed air ducts.
2. Vibration or impact during transportation: During transportation of the pole piece, if it is subjected to vibration or impact, it may cause the pole piece to deflect. This may be due to unreasonable equipment or transportation methods.