Idem.
For a 4-string lithium battery balancer board, the output voltage through all three wires is the same. These three wires are red, black and white, corresponding to the positive, negative and intermediate voltage of the battery respectively. In a 4-string lithium battery balancing board, each battery cell connected in series is connected to a wire on the balancing board. The balancing board monitors the voltage of each battery cell and balances the voltages between the batteries by adjusting the discharge or charge between the batteries. The balancing plate will ensure that the voltage of each battery cell remains constant, improving the performance and life of the entire battery.
11.1V aeromodel lithium battery wiring problem
Connect the battery balance cable to the balance terminal of the balance charger ( there are manywhite interfaces on the side of the balance charger), and at the same time connect the battery discharge cable connected to the output of the balance charger, the balance charging can be carried out.
Select li-ion mode in charger, then select bal chr mode, select current and number of lithium batteries, then charge.
Haha, first of all, let me explain: 1. The one with a T head, that is, the one with only two red and black wires, is the end to which the lithium battery is connected. the motor or receiver model. 2. This set of four wires, with red, green, yellow and black plugs, is a dedicated charging port and connection port for the lithium battery to connect to a dedicated charger. Its function is to independently charge and monitor each lithium battery. in the battery at the same time, also called lithium battery balancing chargemr. Not for other purposes. 3. With this balanced charging port, there is no need to add a charging protection board to the lithium battery. 4. Regarding lithium battery discharge and overvoltage protection, you can purchase an additional lithium battery voltage monitoring module, which can be inserted into your red, green, yellow and black to monitor the voltage of each battery cell. at any time. Generally, the voltage of each battery should not be lower than 2.8V before charging can begin.