It is best not to use it. Connecting batteries of different types together will shorten battery life and may also pose a hazard.
You can buy high-capacity nickel-metal hydride rechargeable batteries. Doesn't the Audi Double Diamond have a capacity of 1800mah? (There seems to be a larger capacity, I haven't driven AWD for a long time)
Slightly higher voltage will have no effect, but if it exceeds too much, the motor may be burnt
< h3>Can a 3.6V lithium battery replace two 1.2V nickel-metal hydride batteries?There is no problem to change lithium battery, but you can only buy lithium batteries with the same appearance as AA batteries. Make sure to buy one with a single battery capacity of 2000 mA or more, otherwise your battery will run out of power after a while.
You can only use 1.2V or 1.5V - digital cameras should use 1.2V, not 3.7V Haha, the low voltage is to increase the current strength. If the voltage is high, use the digital camera. . Burned,,
This explanation should be clearer:
1. If mutual versatility (depending on circuit design, different voltage ranges) is not considered, the same in capacity conditions, a 3.6V lithium battery has a total capacity greater than two 1.2V nickel-metal hydride batteries and can be replaced. For example, 3.6V 1000mAh can replace 1.2V 1000mAh*2. The first is 3.6 Wh and the second is 2.4 Wh.
2. If it is used in a circuit, it generally cannot be replaced. Because the operating voltage range of products using 3.6V lithium batteries is generally 3-4.2V, while products using lithium batteries2-cell nickel-metal hydride batteries of 1.2 V are generally 2 to 3 V.
In addition, with the development of lithium batteries, the rated voltage has been increased to 3.6 V. original at 3.7 V, and there are already 3.8 V batteries (4.35 V fully charged).