Most smartphones today have built-in batteries that are not removable. Battery life is therefore an important factor in the lifespan of smartphones. Battery maintenance is particularly important. How to maintain cell phone batteries? Now I will teach you some tips. Pay attention and let your phone use longer~
OPPO mobile phones are equipped with lithium batteries, which have been activated when leaving the factory. the time doesn't need to be too long. It says it will be charged once it is fully charged. It is recommended to connect the original charger to charge when the phone tells you the battery is low and not to use it while charging.
Here are some tips for using cell phone batteries:
1. Do not discharge too much and charge as soon as the phone displays" low battery ".
2. Don't overload. If the phone is full, you need to unplug the charger.
3. If the battery is not used for a long time, it should be charged to 60%, stored separately in a cool, dry place and recharged every 4 or 5 months.
If your cell phone battery is damaged/aging, in order to turn it back on and use it normally, it is recommended to bring your purchase invoice, warranty card and cell phone to the local OPPO service center for testing. Under warranty, the battery can be replaced free of charge after inspection and confirmation by OPPO customer service center.
Warm reminder:
OPPO original batteries and other spare parts can only be replaced by OPPO official customer service center and are not sold to the outside world.
This answer applies to all OPPO models.
Charging the oppor9s for six hours won't impact the battery, right?
Currently, mobile phones all use lithium batteries, and memory charging does not exist. The way the phone is charged usually has no impact on the phone. It will automatically cut off the power after. it is fully charged. ?
1. Lithium batteries have no memory effect and can be charged at any time. They don't need to be fully charged at the same time?
2. charged and discharged shallowly and should be charged at low power (20%) before charging, which helps extend battery life. Over-discharging to a low battery or automatic shutdown will cause the internal voltage to be too low, which may result in a temporary inability to turn on or charge;?
3. various safety devices. It guarantees thatthe battery circuit is automatically cut off in the event of overcharge, discharge or short circuit; when the battery internal pressure is too high, the exhaust device is triggered to decompress when the battery temperature is too high, hot melt protection; The device is triggered to stop the electrochemical reaction of the battery. The best charging time is when your phone reminds you that you need to charge. This is the best loading time.
How to properly charge your mobile phone1. Charging time is 3 to 4 hours. The loading time should not be too long. Just charge it fully. If the time is long, it will seriously affect the operation. battery life and cause danger.
2. The first charge does not need to be too long
The first charge does not need to be full for 12 hours. This is whatold nickel-metal hydride batteries need. to do. Now The batteries are all lithium batteries or lithium polymer batteries. For the first time, just charge as usual.
3. Do not use the full power of the mobile phone. This will have a serious impact on battery life.
4. It is best not to use a universal charger. The universal charging current is unstable and the quality is uneven.
Is it good for the phone to charge the OPPO Or9splus once it is fully charged?
It has no impact and will automatically turn off once fully charged.
1. Lithium batteries have no memory effect and can be charged at any time. They do not need to be fully charged at the same time.
2. discharged shallowly and should be at low power (20%) before charging, which helps prolongbattery life. Over-discharging to a low battery or automatic shutdown will cause the internal voltage to be too low, which may result in a temporary inability to turn on or charge;
3. . It ensures that the battery circuit is automatically cut off in the event of overcharge, discharge or short circuit; when the battery internal pressure is too high, the exhaust device is triggered to decompress when the battery temperature is too high, hot melt protection; The device is triggered to stop the electrochemical reaction of the battery.
Why does OPPO cell phone battery drain so quickly and how to deal with it?
OPPO mobile phones are equipped with lithium batteries, which have been activated before leaving the factory. It is recommended to connect the original charger to charge when the mobile phone tells you that theThe battery is low. When the prompt indicates that it is fully charged, there is no need to charge it for a long time. Try not to use your phone while charging. ?
In addition, the r9s plus supports flash charging. Points to note when enabling flash loading: ?
1. Does the phone itself support flash charging function?
p> 2. Use the required original flash charging charger and data cable;
3. Charging in non-USB mode;?
4. The environmental limit for ordinary batteries is -10. °C --45°C, flash charging will not work properly below about 15°C. ?
Note: Many factors affect the flash charging effect, especially the ambient temperature. The main reason is the power difference when flash charging stops and flash charging failure at higher or lower temperaturess bass. and other problems, such as: flash charging stops when charging reaches 70% and flash charging stops when charging reaches 50%, etc.
I can't even use the external battery at the end of the day! After almost 10 hours of use, there's still 3% left in the battery! The game I play is "Honkai Impact 3", which I have been following for a long time (the system recommends 2 levels of special effects), and it works well. The most stressful thing should be live streaming, but due to the low network speed in the test environment, live streaming was slow, network speed and traffic were low, and power consumption should be a little lower than normal. But overall, battery life remains very good. (The standby phase is not 100% charged)
If you are using an OPPO mobile phone, learning the maintenance tips ofThe following battery can effectively help you save the power consumption of your mobile. phone:
1. Follow good loading habits1. Use original chargers to charge
Non-original chargers may have agreements with mobile phone charging. Incompatible, easy to damage the battery electrodes, causing the battery to swell.
2. Stop charging when the phone tells you it is fully charged.
The lithium battery used in OPPO mobile phones has been activated when leaving the factory and the first charging time does not work not. it must be too long.
3. Start charging when the “low battery” prompt appears.
Keeping the battery power between 20% and 80% is more conducive to extending battery life.
4. Try to avoid using the mobile phone while charging
Using the mobile phone while charging will increase the temperature of the mobile phone, and charging at high temperatures will accelerate the aging of the battery.
2. Pay attention to the appropriate usage environment1. Use the mobile phone at an appropriate temperature
The recommended ambient temperature for using the mobile phone is -10℃ to 35℃.
When the temperature is too low, battery activity is reduced and available capacity is reduced, resulting in increased power and becomes less durable.
When the temperature is too high, the internal temperature of the battery will continue to heat up and the lost lithium-ion battery capacity will accelerate.
2. Use a mobile phone in a strong signal environment
When using a mobile phone in a weak signal area, the mobile phone will search and transmit frequentlyent signals, which will increase the additional power consumption of communication.
3. Pay attention to the basic power saving settings1. Adjust screen brightness
How to use: Settings>Display & Brightness>Automatically adjust brightness< /p>
2. Reduce the screen refresh rate
How to use: Settings>Display & brightness>More>Screen refresh rate>Standard refresh rate
3. screen display time
p>How to use: Settings>Display & Brightness>Automatically pause screen>15s
4. Disable functions that are not currently used and enable them. turned on immediately
How to use: Scroll down In the notification bar, turn off Bluetooth, NFC, GPS and other buttons
Turn on power saving mode/mode super power saving
p>
How to use: Settings> Battery > Power saving mode/Ultra power saving mode
Observe the correct and reasonable use of the software1. display temporarily unused background programs
Operation method:
(1) Virtual keys are not activated: swipe up from the bottom of the screen and pause for 1 second, click "Clear"
(2) Virtual keys are enabled: click the multitasking key "≡" at the bottom of the screen, click "Clear "
2. disable software autostart
How to use: Settings > Application management > Autostart management, disable autostart permissions for applications that do not require autostart
3. Turn off unnecessary app notifications
How to use: Settings > Notifications & status bar > Notification management, deactivatedisable applications for which you do not want to display notifications
4 Uninstall those that consume. a lot of power and are not commonly used Software
OperationHow to: Settings > Battery > Power consumption details, check the power consumption of each software, find the corresponding software icon, long press l 'icon to uninstall
If the problem persists after doing the above, at normal room temperature, please take your purchase invoice, warranty card and mobile phone to the OPPO official service center for testing, and professional engineers will solve the problem for you.