Battery packaging usually includes: outer packaging - inner packaging - inner box packaging - battery weight - battery properties (power, type) - related instructions on the drums, etc. There are strict regulations
1. Packaging: Must be packed in a clean cardboard box (packing bags and document seals are not allowed);
2. Weight limit: Each box of pure lithium batteries does not exceed 9.5KG.
3. Inner box packaging: Each battery should be packed independently. Power below 2.7W: 2.5KG/carton; power below 20W: 8pcs/inner box; box.
4. Inner box packaging: A fireproof label should be attached to the inner box. Fireproof label requirements: non-folding, standard size: 120*110MM, small fireproof label: 74MM*105MM.
5. Eminner packing: each battery should be packed independently and should be packed in one box; it should be packed in a box inside a box, and a fireproof label should be attached to the box.
6. External Battery Label: There is no description on the exterior surface of the battery or battery pack, and there is no battery power label. If it is an unknown battery, we will not accept it.
7. Power requirements: lithium battery power cannot exceed 100W (AH current*V voltage, 1ah=1000mah); pure batteries will not be accepted;
8. and general merchandise can be used. A shipment of goods can be shipped, but it cannot be shipped in a single shipment. It can be separated into two pieces.
9. There cannot be two types of Volt batteries in a box of pure battery products. An approxoi can contain multiple models, but no more than three models! Otherwise, it will be considered unqualified!
This is completely bad for lithium batteries because they emit heat and gas when charging. If placed in a sealed stainless steel box, the heat will not be dissipated and the battery will eventually explode. In many cases this is completely bad for lithium batteries because heat and gas will be emitted while charging. If placed in an airtight stainless steel box, the heat will not be dissipated and the battery will eventually explode. Therefore, in many cases we must place it in a ventilated environment. We should always put it in a ventilated environment.