cb86plus stopped loading after loading at 4.13. It may be a device problem and you can check it carefully.
1. The CB86 charger can be equipped with a 30A 12V switching power supply.
2. For wheel loading, the balancing head can withstand a current of 5A. (During wheel charging, the charging voltage is set for each cell of all connected batteries, so there is no need to consider the number of connected S batteries. The recommended charging voltage for lithium batteries is 4.2V and the maximum charging current is not more than 6.0V, because the CB86 charging tube uses the battery balance head and the head silicone wire safety current balance does not exceed 6.0 V. If the current is too large, there is a risk of overcharging
3. Charging Huapai 3s2200mah5C Yes, because CB86 has insulation protection., there is no problem