1. Place the tested large-capacity lithium battery into the glove box transition box, then pump and charge inert gas three times. The duration of each pump and load is approximately 5 minutes.
2. Remove the large-capacity charged lithium battery from the transition box and place it on the processing table for disassembly.
3. Use vice-grip pliers in the glove box to disassemble the battery along its edges and separate the lithium tablets from other waste.
4. Put the disassembled lithium tablets and waste into sealed bags respectively.
5. Take out all waste generated during the glove box disassembly process to ensure the cleanliness and safety of the disassembly environment.
6. Transfer all disassembled items out of the glove box and clean the operating surface.