Samsung mobile phones/tablets currently on the market use lithium batteries. The batteries have been activated before leaving the factory, so there is no need for the first charging time of a new mobile phone/tablet to be too long. you charge the new phone/tablet when it tells you the battery is low. Connect the original charger to charge, then charge for 1-2 hours after the prompt is full. It is recommended not to use mobile phones/tablets when charging and charge in standby mode.
I just bought a Samsung note2. Does the battery have to be exhausted before it can be charged?
A quick solution to Samsung mobile phone battery consumption:
1. Replace the battery
If the mobile phone is older than long, then it is possible that the battery life of the mobile phone is getting shorter.oche of its limit. Most mobile phones currently on the market use lithium batteries or lithium polymer batteries, and their service life can reach about 300-600 times in a "fully charged and discharged" state.
Therefore, if the power consumption of the mobile phone accelerates, there may be a problem with the battery. In this case, there is no better way to help users save energy, but you can try to replace it. battery.
When the battery storage capacity returns to normal and the storage capacity increases, the standby time of the mobile phone also increases, which is equivalent to "power saving" in disguise.
2. Reduce the use time of the mobile phone
If there is no problem with the battery of the mobile phone, as the frequency and duration of use of the mobile phone increases, the rateThe power consumption of the mobile phone will also increase, especially when running some software that consumes a lot of power, such as playing games, taking photos, shooting videos, etc.
So if you want to save power and extend the standby time of your mobile phone, the best way is to reduce the frequency and duration of using your mobile phone.
3. Disable background auto-start software
For commercial interests, most mobile phone developers open some special permissions to software developers, and these software developers will do so. The software is set to "start automatically at startup" and "run automatically in background".
When a user is using a mobile phone, even if it appears that no software is running, many software programs are actually started en background of the mobile phone, and these software will occupy a lot of system resources.
Therefore, these software will continue to consume mobile phone battery power. If you want to save energy, you should disable special functions of these software.
Precautions for using mobile phone battery protection:
First of all, pay attention to the connection sequence
The tools used to charge mobile phones are an adapter and a data cable, charging on these power strips with USB does not even require a socket, but this small discreet wire is very special when used. According to scientific research, the order should be to connect the power strip first and then the cell phone.
If it is the other way around, some surges will be transmitted to the mobile phone in the opposite direction. An occasional power surge is no big deal. As thenumber of times increases, the battery. the lifespan of the mobile phone will gradually weaken. This is also sometimes the case soon after purchasing a new cell phone, the basic reason why the battery health is less than 100%.
Secondly, the dryness of the loading port is very important
The loading port of any brand is small and inconspicuous, so it is difficult for us to notice it in our everyday life. Sometimes when people place their phone in water-filled places or accidentally splash it with water, they just focus on wiping their phone and completely forget to check the charging hole for the sake of security.
If a person is unlucky and puts a certain amount of water into the charging hole, it will not dry out in time simply by its own evaporation when charging the phone later.
If the system settings do not remind you of liquid seepage, you may not be able to find the reason for the battery charging for a long time, or the water will spread along the current to various components at inside the phone, and the phone will be damaged, burning or even causing an explosion.
So, in daily life, everyone should always make sure to keep the cell phone in a dry environment. If you have paper that doesn't leave lint when loading, you can wipe it intentionally or unintentionally.
Third, it is best to use the original charger
The original charger is the best adaptation result finally obtained by the company after testing and testing. repeated errors. Under normal circumstances, everyone remains loyal. to the original charger. The charger comes with the original phone.
If the line is unresponsive or hors service, we can ask the dealer if the data cable is within the warranty period. Nowadays, many retailers have excellent after-sales service. Consumers may want to be bold. . to try. If that doesn't work, even if you don't want to spend a lot of money buying original cables, you should still do your homework and choose a replacement produced by a regular electronics factory.
Hello, thank you for using Samsung products!
Based on your question, Samsung mobile phones come standard with lithium-ion batteries. Since lithium batteries do not have a memory function, they can be charged and discharged as needed.
Here are some tips for charging cell phones:
1. Do not use non-original chargers that have voltage and current values in a wide range, because to fitSuitable for many cell phone models, a universal charger is like a universal charger. This has some impact on the battery. It may not be fully charged, damage the battery electrodes, cause battery swelling, affect battery life, and cause unstable power supply of the mobile phone, resulting in automatic shutdown, automatic restart, automatic shutdown during phone calls, etc.
2. Don't overload. You have to wait until the device prompts you for “low battery” to charge; wait until the device turns off automatically before charging it, because the battery has been over-discharged. This affects battery life.
3. Don't overload. When the charger gives a full indication, the charger should be unplugged. Today's mobile phones are all designed with auto-shutoff features. It is acceptable not to removecharger battery for a short time. However, if the battery is left on the charger for a long time, the network voltage will increase. late at night, the charger that stopped charging after increasing, it will continue to charge, causing the battery to overcharge. This affects battery life.
4. If the battery is not used for a long time, charge it to 60% and store it separately in a dark place. Store it in a cool, dry place, and recharge it every 4 or 5 months.
I hope the answer above can help you and wish you a happy life!