If the mobile phone battery is not used for a long time, the lithium battery may be over-discharged, resulting in irreversible capacity loss.
Daily maintenance of lithium batteries:
1. Newly purchased lithium batteries will have a certain power, so users can use them directly when they receive them and use the remaining power after recharging. Lithium battery activity can be fully activated after 2-3 times of normal use. Here's a special reminder: don't believe the seller or internet rumors. New lithium batteries should be activated for up to 12 hours when first used.
2. Lithium batteries have no memory effect and can be charged at any time. However, it should be noted that lithium batteries cannot be over-discharged, resulting in loss of power.e irreversible capacity. When the machine reminds you that the battery is low, it immediately begins charging.
3. In daily use, freshly charged lithium batteries should be left aside for half an hour until the charging performance is stable before use, otherwise the battery performance will be affected.
4. When not using the instrument, be sure to remove the battery and store it in a dry, cool place.
5. Pay attention to the use environment of lithium batteries: the charging temperature of lithium batteries is 0℃~45℃, and the discharge temperature of lithium batteries is -20℃~60℃.
6. Do not mix batteries with metal objects to avoid metal objects touching the positive and negative terminals of the battery, causing a short circuit, damaging the battery or evencausing danger.
7. Do not hit, acupuncture, step on, modify or expose the battery to sunlight, or place the battery in a microwave, high voltage or other environment.
8. Use a matching lithium battery charger to charge the battery. Do not use inferior or other types of battery chargers to charge the lithium battery.
How to store lithium batteries when not used for a long time:
1. If the lithium battery is not used for a long time, it should be charged to 50% ~ 80% of the power, removed from the instrument and stored in a dry and cool environment. And recharge the battery every 3 months to prevent the battery from being too low due to self-discharge, resulting in irreversible capacity loss.
2. Self-discharge of lithium batteriesm is affected by ambient temperature and humidity. High temperature and humidity will accelerate the battery's self-discharge. It is recommended to store the battery in a dry environment. 0℃ and 20℃.
Lithium battery is a primary battery that uses lithium metal or lithium alloy as the negative electrode material and uses non-aqueous electrolyte solution. It is different from rechargeable batteries, lithium-ion batteries and lithium-ion polymer. batteries. The inventor of lithium batteries is Edison. Since the chemical properties of lithium metal are very active, the processing, storage and use of lithium metal are subject to very high environmental requirements. Therefore, lithium batteries have not been used for a long time. With the development of microelectronic technology in the late 20th century, the number of miniaturized devices has increased day by day, impdaring high demands on power supplies. Lithium batteries then entered the stage of large-scale practical use.
Teach you how to activate the lithium battery after starving
1 The battery is exhausted, causing the electric vehicle to lose power as soon as he rolls.
< p>If the user is fully charged and does not ride for a long time and then rides again, the I found that it showed that it was fully charged, but it lost power as soon as that I was driving it. The main reason is that the battery discharges automatically. If you don't ride for a long time, the battery will lose power at that time, even if the dashboard shows a fully charged state, it is actually just a virtual power supply. the actual power is only 70%, or even less. So how do you resolve this kind of situation? It is necessarycharge it every two weeks to avoid battery loss. In addition, it is best to deeply discharge it once a month.2. The battery has aged, which causes the electric vehicle to lose power as soon as it is driven.
Generally speaking, when an electric vehicle has been used for many years, the problem Aging of battery will occur, and battery aging is the most common problem. The direct manifestation is that the battery has been vulcanized, which causes the battery performance to decline. It will be fully charged very quickly, but the dashboard will lose immediately. power as soon as you ride. So how do users solve this problem when they encounter it? Pulse repair can be used to remove the crystals, but if the aging phenomenon is severe, the only option is to replace the battery with anot new.
3. The lines of electric vehicles become wet, causing the electric vehicle to lose power as soon as it is driven.
Summer is a rainy season and the probability of electric vehicles getting wet is high . also higher than other seasons. If the electric vehicle circuit becomes wet, the resistance of the entire circuit will increase. This means that when the electric vehicle starts, the voltage will be low, resulting in a loss of power from the start. How to resolve this situation? When returning from a rainy day, dry key parts of the e-bike and try to avoid riding in deep water.
Why does cell phone battery drain quickly when not in use?
1. Use the charger on a fast charging station to charge: Lithium batteries tend to lose power if left unused.used for a long period of time. If you want to activate them, you can directly push the electric. vehicle at a fast charging station on the street. Find a charger like this to recharge. The current in such places is usually relatively large, and the battery can be activated quickly, then it can be replaced with a corresponding charger and continue to be fully charged.
2. Use a high voltage charger to charge: Find a high voltage charger to charge the low voltage lithium battery. Normally, it is better to use a charger suitable for the battery, which is better for the battery. However, if the lithium battery cannot be charged due to power loss, you can use a high voltage charger to charge it to activate the battery.
3. Turn on the headlights when charging, then recharge: If the scooter remains without charge for a long timeue period and the lithium battery is “starving”, you can turn on the headlights while charging and then recharge. Connect the charger and see if the charging light on the charger changes. If so, it can charge normally.
There are many reasons for mobile phone power consumption, the most common ones are as follows
1 Do not turn off the mobile network or do not disable WIFI search: With. With the wealth of mobile phone applications, the functions of mobile phones have also increased. It is becoming more and more powerful and the use of the mobile phone network is becoming more and more common if the user does not deactivate the "mobile network". function or the LAN WIFI search function in time after using the mobile phone,, then the mobile phone is standby in time and always searches and tries to connect to the Internet, resulting in consumptionunnecessary energy. Disabling the mobile network and internet connection in time is also a good way to do this. save energy.
1. GPS power consumption: More and more users have been using social software such as WeChat and Momo for a long time. These software often need to activate the GPS positioning function, you can search. for satellites or use the Internet network To locate the position, as long as the GPS is turned on, it will also actively search for satellites. Indoors or in some places with thick clouds, satellite signals are very weak and GPS will increase. the power of the search, which leads to rapid power consumption, so if you decide to put your phone to sleep, you must turn it off. The GPS function is good.
3. Too many apps in the background: Many users have many apps installedon their mobile phones. Although this brings convenience, in actual use many applications do not matter whether the user actively opens them or not. not. All of them have processes started in the background. These processes continually scan the network and check for updated software. The background program shows that it is intelligent to a certain extent, but the direct consequence is that the mobile phone's processor is working at a high level. load, which consumes a lot of energy. Therefore, if the mobile phone is, do not install too much unnecessary software unless necessary.
4. Poor telecommunication network signal causes power consumption: When the telecommunication signal is weak, the mobile phone automatically increases the power to search the network to maintain a stable connection with the main network. This process is alsovery energy consuming.
5. The battery itself is worn out and the capacity is reduced: some cell phone batteries have been used for a long time, or the number of charging times has been close to its limit, or the quality of the battery. is substandard and has been damaged, and its internal capacity has been reduced, which will also consume power quickly.
For more service discounts, please follow Anhui Telecom's official WeChat account. You can easily upgrade to 5G without changing cards or plans.