The series connection method of this battery model is as follows:
1. First, install the positive and negative poles of the battery to the battery.
2. Screw the three pinholes on the battery into the positive and negative terminals of the battery respectively, and insert nails or screws into the corresponding pinholes on the positive terminal of the battery.
3. Insert the four pinholes of the battery into the lithium battery socket, unscrew the charging hole and insert the power plug into the lithium battery.
4. After installation is completed, secure the battery base with screws.
Can 1860 lithium battery be soldered with
1860 solder? Is it 18650?
Divide the voltage by the cell voltage to get the number of series connections. For example, when fully charged, 4.2V, 48/4.2 = 11.4, then it is more apProper to use 12 series (take the series). higher value)
Use A Divide the cell capacity by the number of hours to get the number of parallel connections. For example, if the battery is 10Ah and the cell is 2.0Ah, then this is the case. 10 Ah/2 Ah = 5 and
The total battery of 48 V x 10 Ah requires 12 x 5 = 60 batteries
No.
Lithium batteries cannot be welded, because the surface metal of lithium batteries is relatively inert and its surface is usually nickel-plated. If you want to solder on the surface of this metal, solder. is more difficult.
Soldering is a welding method that uses low melting point metal solder to heat and melt, then penetrate and fill gaps at the joints of metal parts.